Best way to paint partial Bilge
#1
Registered
Gold Member
Thread Starter
Join Date: Mar 2004
Posts: 83
Likes: 0
Received 0 Likes
on
0 Posts
Best way to paint partial Bilge
My sonic has a in-dash cooler that collects water from the melted ice and sends water to the bilge. I don't normally drain the plug every week and as a result the bilge has gotten stained more than I like for a 2004 boat. Any recommendations on how to paint under the motors would be appreciated? The bilge came pre-painted in yellow paint.
#3
Registered
Join Date: Oct 2004
Location: medellin colombia, pablo escobar's lil town
Posts: 8,390
Likes: 0
Received 6 Likes
on
4 Posts
Re: Best way to paint partial Bilge
awlgrip and sterling have thinners for brush painting the paints. use the tip of the brush be patient and you will be very happy with the results. i prefer awlgrip as i think it holds up better and is harder. paint is less porous than gelcoat so the bilge will clean real easy.
#4
21 and 42 footers
Platinum Member
Re: Best way to paint partial Bilge
Originally Posted by offthefront
pour in a gallon and go for a ride ..........