Go Back  Offshoreonly.com > Owners Forum > Magnum Marine
X-dimension Volvo to Bravo swap >

X-dimension Volvo to Bravo swap

Notices

X-dimension Volvo to Bravo swap

Thread Tools
 
Old 12-02-2012, 09:20 AM
  #11  
Registered
 
Join Date: Oct 2009
Location: LI, NY
Posts: 352
Likes: 0
Received 3 Likes on 3 Posts
Default

Just eyeballing cig92's transom I would guess my X is 1 1/2" higher. Mine is as high as possible... I could not get on plane with 3blade props turning out. The reason I asked about what motors you have is because the center on center measurement might affect the x-dim computation. My c on c is 33 1/2"
MDonziM is offline  
Old 12-02-2012, 02:03 PM
  #12  
Registered
 
Join Date: Sep 2008
Location: Bedford & Wolfeboro, NH
Posts: 455
Likes: 0
Received 0 Likes on 0 Posts
Default

Center to Center Dimension

Marshalls boat is at 33 1/2"
My old Volvo boat is at 29"

If you are raising your X and rebuilding your transom, change your X dimension if your Volvo boat is close to 29".

I did not spread my c to c, and this created a lot of difficulties with exhaust system upgrades, along with a large expense.
Mario L. is offline  
Old 12-02-2012, 02:16 PM
  #13  
Platinum Member
Platinum Member
 
Kalaazar's Avatar
 
Join Date: Apr 2007
Posts: 417
Likes: 0
Received 2 Likes on 2 Posts
Default

Originally Posted by Mario L.
Center to Center Dimension

Marshalls boat is at 33 1/2"
My old Volvo boat is at 29"

If you are raising your X and rebuilding your transom, change your X dimension if your Volvo boat is close to 29".

I did not spread my c to c, and this created a lot of difficulties with exhaust system upgrades, along with a large expense.
-I put a new Transom into "Side Winder" and set the new C/L at 31". I would willingly give you the X dimension, but as I have not run the boat yet I would not want to mislead you.
Unless of course your looking to take a gamble, however you will see from my postings the engines now come out through the engine hatch.

Kalaazar
Kalaazar is offline  
Old 12-04-2012, 03:33 PM
  #14  
Registered
 
Join Date: Sep 2005
Location: Grand Island NY
Posts: 238
Likes: 0
Received 0 Likes on 0 Posts
Default

I am at 33" C/L, I found that to be dead center for my sbc cradle mounts and it seems to be a standard... sbc @ 33" and BBC @ 36"
27 MAGNUM is offline  
Old 12-04-2012, 06:12 PM
  #15  
Registered
Thread Starter
 
Join Date: Jul 2012
Posts: 29
Likes: 0
Received 0 Likes on 0 Posts
Default

I will have to go double check mine at the shop, but I think it is 33" on center.

Looks like I will be doing 16.5" to 17" based on all the info, hey if I get it wrong thatrs what shorties or spacers are for ....

Thanks to all that chimed in , will post pictures of the new transom when I get it finished.


Paul
27sport is offline  
Old 01-11-2013, 07:40 PM
  #16  
Goumada P5-38
Gold Member
 
Jmemoli's Avatar
 
Join Date: Jul 2001
Posts: 638
Received 10 Likes on 6 Posts
Default X

I had twin 500 s , converted my mds drives to bravo 1 . With the x at 16.5 " , I got up on plane with 25 3 blade mirage plus . Spun those bad boys to 5900 rpm . Getting on plane was no problem. Centerline was 33".
Jmemoli is offline  
Old 01-11-2013, 08:32 PM
  #17  
Registered
Thread Starter
 
Join Date: Jul 2012
Posts: 29
Likes: 0
Received 0 Likes on 0 Posts
Default

Well, turns out my drives were currently 30" center to center. Not exactly sure what to do here now, do I still go w 16.5 x at that spacing? We are getting close to decision time transom is filled and glassed...

Paul
27sport is offline  
Old 01-11-2013, 09:39 PM
  #18  
Gold Member
Gold Member
 
h2oboater's Avatar
 
Join Date: Dec 2003
Location: NewBaltimore Mi
Posts: 3,493
Received 56 Likes on 32 Posts
Default

Originally Posted by Jmemoli
I had twin 500 s , converted my mds drives to bravo 1 . With the x at 16.5 " , I got up on plane with 25 3 blade mirage plus . Spun those bad boys to 5900 rpm . Getting on plane was no problem. Centerline was 33".
Did you have Roger Munn's sport ? Not many have had MDS drives.
Attached Thumbnails X-dimension Volvo to Bravo swap-scan0047.jpg   X-dimension Volvo to Bravo swap-scan0083.jpg   X-dimension Volvo to Bravo swap-scan0073.jpg  

h2oboater is offline  
Old 01-13-2013, 05:11 PM
  #19  
Goumada P5-38
Gold Member
 
Jmemoli's Avatar
 
Join Date: Jul 2001
Posts: 638
Received 10 Likes on 6 Posts
Default

Originally Posted by h2oboater
Did you have Roger Munn's sport ? Not many have had MDS drives.
I believe it was Gary munds boat , an early partner of Roger munn.
It was a red sport , purchased from Kurtz marine .
Jmemoli is offline  
Old 01-13-2013, 05:33 PM
  #20  
Goumada P5-38
Gold Member
 
Jmemoli's Avatar
 
Join Date: Jul 2001
Posts: 638
Received 10 Likes on 6 Posts
Default

Here are some pics from 2001 .
I stripped the boat and sold it to Giovanni Theodoli at Magnum .
I think he took a mold off of it .
Attached Thumbnails X-dimension Volvo to Bravo swap-p4040064.jpg   X-dimension Volvo to Bravo swap-p6010014a.jpg  
Jmemoli is offline  


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.