mr vinyl

[ATTACH=CONFIG]520831[/ATTACH][ATTACH=CONFIG]520832[/ATTACH][ATTACH=CONFIG]520833[/ATTACH]Jeremy, will they fit in the cockpit...combined with, seats, walk thru and side padding??? This is the 1st one I completed, seats and all upholstery came from TwinMarine , around $ 6,500. Also engine compartment will be very tight, you will most likely have to go to a raised hatch[ATTACH=CONFIG]520829[/ATTACH.only the liner was put in locally [A[/

mr vinyl

[ATTACH=CONFIG]520834[/ATTACH]

cig28

[ATTACH=CONFIG]520981[/ATTACH][ATTACH=CONFIG]520982[/ATTACH][ATTACH=CONFIG]520983[/ATTACH]Here's some pic of the finish deck

cig28

Sorry for the sideways pics

Katanna

Wow, nice work. Looks great!

Katanna

What did you use for paint?

cig28

Imron

h2oboater

Jim looks great I like it much better without the rails & hatches.. Did you do the whole deck ?

cig28

Yes , all the holes were filled and im starting with a new slate. I have an original lifeline I'm installing with the strip of teak down the middle

h2oboater

Jim After all the work you have done I take it that you are going to keep this beautiful Mirage now? Hope all is well now with you & your home after all you have gone through with hurricane Sandy. Mark