sick engine room explosion- HD Miss GEICO onboard
#12
Registered
#14
Registered
Are the drive shafts anything special or up until now was it an overlooked item. Obviously in drag racing the Pro/Stock cars and the Pro/Mods are using some strong stuff.......actually the shafts are aluminum. No boat is making the power of a Pro/Mod Car!
#16
Platinum Member
Platinum Member
I'd have to agree, the Carbon Fiber didn't hold up at all and just shattered into a million pieces. They probably slowed down the shrapnel some but I'd look for something a little stronger like a nice piece of Schedule 40 Aluminum sectioned in half with lot's of bolts to hold it together... Jim
#18
Registered
The tires and/or clutch is slipping until the point at which force=available traction on those cars. Not much (relative) slippage in boats, different animal.
#19
Registered
Join Date: May 2011
Location: DFW Lake Lewisville
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
#20
Registered
Lift the pro stock up, spin the car to 5000 rpm and drop it back on the track, over and over again