35 xp
#1
Registered
Thread Starter
35 xp
Hi guys setting up a 35 XP to race and before we purchase engines we want to double check the weight of the boat. anyone have any idea as to what these things weigh?
thanks
thanks
The following users liked this post:
Hadtohaveit (01-17-2023)
#2
Platinum Member
Platinum Member
from there website.
Motion 35XP
Be the DOMINATOR!!! Experience the same winning hull that won the 2000 A.P.B.A. Factory-3 National Championship. A true thoroughbred, this model is outfitted with two F-16 canopies for maximum wind deflection and visibility at high speeds. Our spacious cockpit has two front racing style bucket seats with a bolster style rear bench seat for three. We have incorporated a full fiberglass inner liner for superior structural integrity and easy cleaning. This model has been designed for various power options.
Specifications
Length: 35'0"
Beam: 9'3"
Weight:3,200 lbs
Fuel Capacity: 200 gallons
Standard Equipment
Custom racing bucket seats with rear bench seat seat with combing pads
S/S pop-up cleats (4)
S/S lifting eyes, bow and stern
s/s fuel fills
White color gel coat
Hull and deck bonded around entire perimeter
Bi-Tri Axial Directional Fiberglass construction using vacuum bag techniques
Vinyl-ester resin
Motion 35XP
Be the DOMINATOR!!! Experience the same winning hull that won the 2000 A.P.B.A. Factory-3 National Championship. A true thoroughbred, this model is outfitted with two F-16 canopies for maximum wind deflection and visibility at high speeds. Our spacious cockpit has two front racing style bucket seats with a bolster style rear bench seat for three. We have incorporated a full fiberglass inner liner for superior structural integrity and easy cleaning. This model has been designed for various power options.
Specifications
Length: 35'0"
Beam: 9'3"
Weight:3,200 lbs
Fuel Capacity: 200 gallons
Standard Equipment
Custom racing bucket seats with rear bench seat seat with combing pads
S/S pop-up cleats (4)
S/S lifting eyes, bow and stern
s/s fuel fills
White color gel coat
Hull and deck bonded around entire perimeter
Bi-Tri Axial Directional Fiberglass construction using vacuum bag techniques
Vinyl-ester resin
#5
Registered
Fuel tanks are most likely fiberglass. That could pose a problem with today's fuels. I have owned four Motions and most had tank problems. The fix for me was installing aluminum tanks. Skaters have the same issue.
#6
Registered
Skaters HAD the issue, haven't heard of ethanol breakdown since the issue was discovered and Peter made the resin change in the tank construction / older boats had the tanks rebuilt
The following users liked this post:
abones (01-05-2022)