Got Hydraulic Steering ?
#13
Registered
Join Date: May 2005
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Call This #513-407-0215 For Steering Systems
This Guy Builds Systems From Scratch.i Own A Machine Shop & Am Huge On Quality & Feel That No Other Systems Are Better Than His. Braided External Hoses - Very Nice Wing Plate With 6 Attach Points,ect. I've Had 2 Other Brands And Both Were Good But I Got A Daul Ram System With Custom Helm Installed For $1200.00 Less Than Any Other Systems I Came Across. Xs Performance .
#14
Registered
Join Date: Jul 2006
Location: Virginia
Posts: 477
Likes: 0
Received 0 Likes
on
0 Posts
This Guy Builds Systems From Scratch.i Own A Machine Shop & Am Huge On Quality & Feel That No Other Systems Are Better Than His. Braided External Hoses - Very Nice Wing Plate With 6 Attach Points,ect. I've Had 2 Other Brands And Both Were Good But I Got A Daul Ram System With Custom Helm Installed For $1200.00 Less Than Any Other Systems I Came Across. Xs Performance .
#15
Registered
Thread Starter
We have WPM and Zeiger kits for that application. We would be happy to quote you a price, what type of system are you looking for? Full hydraulic or add-on? Also please take the time to use the measurment sheet above so we can get an idea how much room we are working with.
Thanks,
Brad
Thanks,
Brad
#16
Registered
Thread Starter
Thanks,
Brad
#17
Registered
Thread Starter
A dual bravo/dual ram Mayfair add-on system part# 137-9582 would run you $2799.99. That includes all pre-made stainless braided lines inside and out. These rams mount 19.5" out from the crank center line so please make sure you have room before ordering a system. If you do not have that much room, let me know and we can switch to a "space saver" kit.
Thanks,
Brad
Thanks,
Brad
#18
Registered
Join Date: Jan 2005
Location: Rio Villa Texas
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
A dual bravo/dual ram Mayfair add-on system part# 137-9582 would run you $2799.99. That includes all pre-made stainless braided lines inside and out. These rams mount 19.5" out from the crank center line so please make sure you have room before ordering a system. If you do not have that much room, let me know and we can switch to a "space saver" kit.
Thanks,
Brad
Thanks,
Brad
#19
Registered
I've got Marine Machine twin rams right now, the add on kit. I'm looking to get a hydro helm and whatever else is needed to finish the system. My cable needs replacement if i don't go to hydro......
#20
Registered
Thread Starter