CMI = Small Block Performance!!
#11
Offshoreonly Advertiser
Offshoreonly Advertiser
Thread Starter
I am sure they will make whatever you want as long as you are going to pay for it, but they do not stock them! I would be happy to get you a set of the Glenwood Log Manifolds and some risers? Not to many SBF's in the industry any more... -Eric
#12
Registered
VERY COOL!!
CMI has your answer once again! They offer a full line of SBC LS series headers! They do not heavily market this products but is very available! Tail Pipes extra... I attached a video showing a custom set of SBC, LS headers!
http://www.youtube.com/watch?v=X-pVkY2eJoA
LS- CMI E-Tops for SBC (cool collar/swept back) series.
Primary- 1.75", Clamp- 3.5"
Polished E-Top- $2766.04
Satin E-Top- $2424.47
LS- CMI Std. E-tops for SBC (like BBC E-tops).
Primarys- 1.75", Clamp- 4"
Polished E-Top- $3509.65
LS- CMI Custom Sport tubes for SBC
Polished Sport Tubes- Starting @ $4500.00
http://www.youtube.com/watch?v=X-pVkY2eJoA
LS- CMI E-Tops for SBC (cool collar/swept back) series.
Primary- 1.75", Clamp- 3.5"
Polished E-Top- $2766.04
Satin E-Top- $2424.47
LS- CMI Std. E-tops for SBC (like BBC E-tops).
Primarys- 1.75", Clamp- 4"
Polished E-Top- $3509.65
LS- CMI Custom Sport tubes for SBC
Primary- 1.75", Clamp- 4" (or custom)
#13
Offshoreonly Advertiser
Offshoreonly Advertiser
Thread Starter
Make your little guy purr like a big one! Headers are selling fast so pick up a set before prices go up!
#15
Offshoreonly Advertiser
Offshoreonly Advertiser
Thread Starter
Yes, but we only have the pretty polished... Give us a call and we will work you a smoking deal! -Eric
#16
Registered
It sucks that due to lack of funds I missed out on a great deal there...I may now be going with Lightning headers due to much lower cost.
They are not full stainless, only the inner tubes are but orange painted outer tubes might look just as nice in my case.
They are not full stainless, only the inner tubes are but orange painted outer tubes might look just as nice in my case.
#17
Registered
GOT S.S. SMALL BLOCK HEADERS? BOOST UP THAT SMALL BLOCK CHEVY! ADD 10% H.P. AND TORQUE AND GET THAT SEXY LOOK FOR NO EXTRA CHARGE! HEADERS IN STOCK AND READY TO SHIP! REMEMBER FOR YOU SALT WATER GUYS, GO S.S. OR GO HOME!
POLISH- $2499.97 (CMI Retail- $3457.54)
SATIN- $2199.97 (CMI Reatil- 3030.58)
+ Tail Pipes
POLISH- $2499.97 (CMI Retail- $3457.54)
SATIN- $2199.97 (CMI Reatil- 3030.58)
+ Tail Pipes
Are you aware of these headers being applied on a stock 6.2L MerCruiser and, if so, what were the performance gains? Thanks.
#18
Registered
You will also have to get new tips or remove the pinwheel baffles in the corsa tips.
Honestly other than it will ride like a different boat taking all that weight off the rear doubt you will see an major speed gains.
#19
Registered
CMI claims each header weighs about 20 lbs, so the weight reduction will be nice. Do you know what each cast iron manifold weighs?
I know not to expect big gains in power on a stock powerplant, but long term I plan to make some engine modifications or go to new engines all together that will really make use of a good exhaust. Although, it would be nice to talk to someone that has made the swap on the 6.2L to get their feedback and make sure there were no issues with installation. I wonder if they have actually sold any of these headers.
#20
Registered
They are sold out of them, but they now have the new SBC E-top's
I took my boat right up to CMI and these "older" style headers they were selling at blow out price would not fit.
They protrude past the block a couple inches so unless your set up does not use "S" pipes they may work, but on mine with "S" pipes they did not.
(I have the build sheet if you'd like to message me your email I can forward a copy to you.)
I have the 350 Mag and didn't get them on yet but will post results soon. I don't know about the tips...mine aren't Corsa tips, they are straight through so that didn't apply to me.
Dyno testing showed a 10-15% HP gains with the older style and I don't know what they claim on the new E-tops but I'm hopeful of more gains than just weight loss.
I took my boat right up to CMI and these "older" style headers they were selling at blow out price would not fit.
They protrude past the block a couple inches so unless your set up does not use "S" pipes they may work, but on mine with "S" pipes they did not.
(I have the build sheet if you'd like to message me your email I can forward a copy to you.)
I have the 350 Mag and didn't get them on yet but will post results soon. I don't know about the tips...mine aren't Corsa tips, they are straight through so that didn't apply to me.
Dyno testing showed a 10-15% HP gains with the older style and I don't know what they claim on the new E-tops but I'm hopeful of more gains than just weight loss.