43 Nortech, Changed . No more Hopping
06-20-2011, 07:00 PM
#11
Registered
Thread Starter
Join Date: Mar 2001
Location: Ocala, FL/Union Mills NC
Posts: 1,752
Likes: 0
Received 0 Likes
on
0 Posts
My post is not to offend any person or builder, I have driven many that are good and some that have a hop. I am not here for the drama either, some may have a problem they want solved, and some not. I have no problems with Terry or Tron. I am a consultant for many manufactures and help them or clients privately. I had a client who brought his boat to me because he was frustrated with the handling issues he has had. I made corrections on the bottom and other changes with positive results and the guy can now enjoy. You guys know me, I am not the bad guy, just help others. Thanks for understanding. BTW I drive alot of Nortechs and like them, Just consider this Mods for Nortechs!
Last edited by Tres; 06-20-2011 at 07:10 PM.
06-20-2011, 08:18 PM
#12
Fast Priorty II Nor-Tech
Platinum Member
"I am a consultant for many manufactures and help them or clients privately."
Cool then why don't you kill the thread
Cool then why don't you kill the thread
Last edited by bill63; 06-20-2011 at 08:20 PM.
06-21-2011, 06:16 AM
#13
YIKES
06-21-2011, 12:30 PM
#16
06-21-2011, 01:55 PM
#18
Registered
Join Date: Nov 2003
Location: 1 Flu Ovr KuKos Nest-WI
Posts: 9,950
Likes: 0
Received 0 Likes
on
0 Posts
06-21-2011, 05:51 PM
#20
Platinum Member
Platinum Member
Why does everyone have a problem with Tres?
He has done nothing but give back to the boating community for years and has done it very tastfully.
For years always known as the go to guy with cigarette's too.
Tres is in business same as anyone else on here, and he just happens to be real good a figuring out the tricks of making a hull that much better than it already was.
You have the flip side too,......not every boater even drives there boat to it's true potential.
Other's don't even care.
And then the few that want the absolute most out of there hull and are willing to go to great length's to get it.
Boats are no different than cars,....plenty of builders,...plenty of tuner's. Not every builder is great at every aspect of there product.
Tres doesn't even have to take the time to share,...other hand it's nice to know who is capable and who has figured the quirks of any given product.
Never met the man,.......have talked to him in the past and always a stand up guy and always took the time even when super busy.
Just my take on it,........I think Nortech's are great,....also think Tres is an asset to our community.
Fountain's had Skater Build them
Cigarette had Skater Build them
Some time's there are just reason's that justify known limitations, not a big deal,....deep down we all want the best.
This thread was starting to look like an Apache Thread.
Jon
He has done nothing but give back to the boating community for years and has done it very tastfully.
For years always known as the go to guy with cigarette's too.
Tres is in business same as anyone else on here, and he just happens to be real good a figuring out the tricks of making a hull that much better than it already was.
You have the flip side too,......not every boater even drives there boat to it's true potential.
Other's don't even care.
And then the few that want the absolute most out of there hull and are willing to go to great length's to get it.
Boats are no different than cars,....plenty of builders,...plenty of tuner's. Not every builder is great at every aspect of there product.
Tres doesn't even have to take the time to share,...other hand it's nice to know who is capable and who has figured the quirks of any given product.
Never met the man,.......have talked to him in the past and always a stand up guy and always took the time even when super busy.
Just my take on it,........I think Nortech's are great,....also think Tres is an asset to our community.
Fountain's had Skater Build them
Cigarette had Skater Build them
Some time's there are just reason's that justify known limitations, not a big deal,....deep down we all want the best.
This thread was starting to look like an Apache Thread.
Jon
Last edited by cougarman; 06-21-2011 at 05:59 PM.
