36 With 1460 hp Chief turbo
02-17-2014, 01:34 PM
#361
Registered
Kjell, how big of a crane would somebody need to swing 10-20K pound boats from a trailer into the water if you could get pretty close like your set-up above? I am thinking 40-50 ton? Also, the crane would be able to stay in one spot, so is an old crawler the cheapest way to go?
02-17-2014, 01:46 PM
#365
Registered
Thread Starter
Join Date: Jul 2013
Location: Stockholm Sweden
Posts: 465
Likes: 0
Received 0 Likes
on
0 Posts
Yes i Think an old crawler is the cheapest way to go. if you will hawe it stationed there for some time, 20000 lbs is 9 tons. So a 50 t crane vould probably handle about 20 t at least.
02-17-2014, 01:56 PM
#367
Registered
Thread Starter
Join Date: Jul 2013
Location: Stockholm Sweden
Posts: 465
Likes: 0
Received 0 Likes
on
0 Posts
This old macine where in use on a Construction site in Stockholm about a year ago.
It was wery exhiting for me to Watch it..i hawe newer seen such a pice in work Before.
