36 swim plat form
#2
Registered
Platinum Member
Join Date: Jul 2009
Location: Traverse City, MI
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
Aluminum Metal Fab in Ohio built mine. It didnt fit perfect when I got it and had to make some adjustment on mounting points and had to add additional bracing.[ATTACH=CONFIG]555922[/ATTACH]
#4
Registered
Platinum Member
Join Date: Jul 2009
Location: Traverse City, MI
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
Havent had any seat time to be honest. I will be doing a full write up once I get the boat back. I was able to use the boat 3 times after I bought it and then had motor failures. The boat has been under the knife since last September. Should be picking it up tomorrow. New motors, drives, transmissions, batteries, stereo, underwater exhaust, swim platform, props, gps, digital trim indicators, seats, steering wheel, interior top and bottom and paint work.
#6
Registered
Platinum Member
Join Date: Jul 2009
Location: Traverse City, MI
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
Precision Power Offshore did my engines, drives, transmissions and a few other things. When I bought the boat it had 10 hours on refreshed motors. They started as Ron Potter 900 efi. When the previous owner refreshed them last they changed them from solid lifters to hydraulic BUT didn't change the tune in the computers. So I got to put about 3 hours on the boat and then it went to ****. I'm not a fan of having problems when it's boating season as it's very short in Michigan so while the motors were out I had Precision make "everything" new so I and the next owner hopefully won't have any issues. New motors are dialed in at 1060hp on 90 octane and are hydraulic. Can't wait to post pics. New motors look amazing and the interior turned out outstanding.