Video of 540 for a Rage
#1
Registered
Thread Starter
Join Date: Oct 2000
Location: Spicewood, Texas USA
Posts: 1,382
Likes: 0
Received 3 Likes
on
2 Posts
![Default](/forums/images/icons/icon1.gif)
Here's a link to a video of the dyno run for the engine I just finished destined for TXINSTIGATOR's 25 Rage. It's currently at 8 PSI boost. I'll be dropping it to about 6 for the final setup.
http://media.putfile.com/Full-Thrott...ine-1000-EFISC
http://media.putfile.com/Full-Thrott...ine-1000-EFISC
#5
Registered
Join Date: Jul 2006
Location: Gordonville, TX
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
All I can say is THANKS BOB!!! When we started this project I never thought we would get this kind of horse power. I can't wait to get it in the water. Bob still has about a month of work to do to get it complete. We will post numbers after we get it on the water. Not sure if I will ever have the *&ll's to open it up all the way, if I do it will be posted here first. I think a drive will be the next upgrade.
#7
Registered
Thread Starter
Join Date: Oct 2000
Location: Spicewood, Texas USA
Posts: 1,382
Likes: 0
Received 3 Likes
on
2 Posts
![Default](/forums/images/icons/icon1.gif)
Hey, Bajarunner. I built a couple of supercharged 383's that dyno'd at 555 HP at the flywheel. I installed them in the boat and they dyno'd at 490 at the prop. So, the drives are eating a lot more than the 30 HP everyone thought. Using this as a comparison, your 510 at the prop translates to about 560-570 at the flywheel. That's about what we were expecting. I'll be doing a comprehensive test to verify drive loss shortly and will post the results.