Finally!
#1
Registered
Thread Starter
Finally!
Hi Guys,
Some of you met my friend Butch Fletcher AKA Mayor McCheese .........at the Nordic Jamboree. Unfortunately, we didn't get his boat finished in time to bring it.
It's a 1996 Heat. We are done: rebuilt supercharged 496/stroker 454, lots of new internals, with all new CMI headers and new style exhaust. We think it's a nice update for an older Heat. Thanks for the tips Nate and Jeff! Running strong so far. No GPS #s, we'll have to borrow a handheld.
Here some pics.
Regards,
Steve
Some of you met my friend Butch Fletcher AKA Mayor McCheese .........at the Nordic Jamboree. Unfortunately, we didn't get his boat finished in time to bring it.
It's a 1996 Heat. We are done: rebuilt supercharged 496/stroker 454, lots of new internals, with all new CMI headers and new style exhaust. We think it's a nice update for an older Heat. Thanks for the tips Nate and Jeff! Running strong so far. No GPS #s, we'll have to borrow a handheld.
Here some pics.
Regards,
Steve
Last edited by Steve Zuckerman; 07-10-2007 at 06:45 PM.
#4
Registered
Thread Starter
Hey...I think that used to be my boat!! It had a blower motor in it when he got it didn't it? If so it dyno'd back in the day at 804HP. I still have the sheets. He had a black slammed dually when he got it with a trick paint job. I would like to talk to Butch. Tell him to call Jim at 404-558-7724
I'm pretty sure it is your former boat. Butch told me he bought it from someone in Northern Georgia. I'll give him your #.
He did show me the dyno sheets BTW, and they were 804HP. Since then, he's been through several rebuilds.
Regards,
Steve
#5
Registered
Jim, If he blows this engine we're sending it back to you to have it built. That motor was bullet proof. A freakin' carb nut sent it to hell. It ain't been right since. Hopefully this one will be right.
#6
Registered
Join Date: Apr 2007
Location: Cartersville, GA
Posts: 272
Likes: 0
Received 0 Likes
on
0 Posts
This is the guy who built it. All I did was put gas in it and put a drive from Dean @ The Bravo Shop on it. I'm happy Butch is still having fun with it.
Grimes Automotive Machine
215 Tidwell Drive, Alpharetta, GA 30004
Grimes Automotive Machine
215 Tidwell Drive, Alpharetta, GA 30004
#7
Registered
VIP Member
That first motor was unreal. Those guys really knew what they were doing. We had never seen anything like that when he got it. Kennyo was right....after the nut, it was never the same.....setup...timing afr....was never correct on the boat after the original dial in.