Ski Pylon Movement
#1
Registered
Thread Starter
Join Date: Jul 2006
Location: Aliso Viejo, CA
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
I have a 2005 Nordic Rage. It appears that the ski pylon is loose now. I can move it with my hand and it hits the edges of the fiberglass hole it comes through. It has cause some stress cracks to the stern of the pole which I am sure are due to the pole applying pressure to the fiberglass when skiing or wakeboarding.
I have looked at the mounting bracket in the engine compartment and nothing is obviously damaged. I am unable to tighten any of the mounting bolts on either the attachment to the hull or the bolt through the pylon, but it is difficult to get a good pull due to the cramped location. It simply looks as if there is some play in the metal bracket.
Any thoughts on how I can fix this / prevent it from happening again? Also does anybody know of a good repair facility in Southern California, near Orange County?
I have looked at the mounting bracket in the engine compartment and nothing is obviously damaged. I am unable to tighten any of the mounting bolts on either the attachment to the hull or the bolt through the pylon, but it is difficult to get a good pull due to the cramped location. It simply looks as if there is some play in the metal bracket.
Any thoughts on how I can fix this / prevent it from happening again? Also does anybody know of a good repair facility in Southern California, near Orange County?
#2
Registered
![Default](/forums/images/icons/icon1.gif)
I have a 2005 Nordic Rage. It appears that the ski pylon is loose now. I can move it with my hand and it hits the edges of the fiberglass hole it comes through. It has cause some stress cracks to the stern of the pole which I am sure are due to the pole applying pressure to the fiberglass when skiing or wakeboarding.
I have looked at the mounting bracket in the engine compartment and nothing is obviously damaged. I am unable to tighten any of the mounting bolts on either the attachment to the hull or the bolt through the pylon, but it is difficult to get a good pull due to the cramped location. It simply looks as if there is some play in the metal bracket.
Any thoughts on how I can fix this / prevent it from happening again? Also does anybody know of a good repair facility in Southern California, near Orange County?
I have looked at the mounting bracket in the engine compartment and nothing is obviously damaged. I am unable to tighten any of the mounting bolts on either the attachment to the hull or the bolt through the pylon, but it is difficult to get a good pull due to the cramped location. It simply looks as if there is some play in the metal bracket.
Any thoughts on how I can fix this / prevent it from happening again? Also does anybody know of a good repair facility in Southern California, near Orange County?
Other than Randy Davis, I have never seen anyone pull skiers behind a Nordic. The ski pole is a vestige of the company's ski race past and heritage. Mine is thankfully GONE. It's a useless knee knocker (ask KennyO
![Grinser010](/forums/images/smilies/grinser010.gif)
What they should offer is a quick release pin and a deck cap to cover the hole. Would be easy to do.
The pole sits in fabbed cup that bolts to the transom. It has a through bolt pinning it into the cup. Just pull the bolt and pull it out through the deck. I covered mine with a round transom light.
If you want to keep your's (?), just tighten the cup to the transom (there are two stainless nuts above the drive) and/or the through bolt through the bottom of the billet ski pole.
Regards,
Steve
Last edited by Steve Zuckerman; 06-09-2008 at 10:48 AM.
#3
Registered
Join Date: Apr 2007
Location: Cartersville, GA
Posts: 272
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
I like the light idea! I assumed you just wired it to you anchor light. Does it shine light on the swim platform?
I used my ski pylon once to pull a stranded wave runner in.
I used my ski pylon once to pull a stranded wave runner in.
#4
Registered
Join Date: Sep 2001
Location: Lakeway, TX (Austin/Lake Travis) / LOTO Gravois Arm
Posts: 671
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
I'm in the minority....I've used my ski pylon to pull skiers many many times -- behind my 28 Heat. I also pull tubers. Just did it this weekend.
And, of course used it to tow several boats in distress.
Mine's still rock-solid.
I2D
And, of course used it to tow several boats in distress.
Mine's still rock-solid.
I2D
#5
Registered
Join Date: Oct 2000
Location: Tucson, Arizona, USA
Posts: 208
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
There are many Nordics that run the Catalina Ski Race ranging from
28 to 35 feet. And we pull out the stock pylon and put one in that is
around 2 feet tall. Then we go beat the crap out of it on the ocean pulling
skiers north of 60mph for 62 miles.
Sounds like your pylon just needs bolt tightening, tough as it may be.
(I own a 35 where access to the pylon is surprisingly easy).
Pesky Varmint
28 to 35 feet. And we pull out the stock pylon and put one in that is
around 2 feet tall. Then we go beat the crap out of it on the ocean pulling
skiers north of 60mph for 62 miles.
Sounds like your pylon just needs bolt tightening, tough as it may be.
(I own a 35 where access to the pylon is surprisingly easy).
Pesky Varmint
#6
Registered
![Default](/forums/images/icons/icon1.gif)
Yes, I wired into the hot for my stern light, similar to the '99 and older Heats before the electric pole light. I guess you could put it on a seperate circuit if you wanted to.
Are you coming to the regatta?
Mayor McCheese will be there with your former ride. We've done some cool updates in the last few years. I bet it will be the oldest ('96) Nordic there, unless Casey brings his. It still looks cool with the Miami Vice colors and windows. Like a classic muscle car, they just never go out of style
![Cool](/forums/images/smilies/cool.gif)
Still liking the Flame?
Regards,
Steve
#7
Registered
![Default](/forums/images/icons/icon1.gif)
There are many Nordics that run the Catalina Ski Race ranging from
28 to 35 feet. And we pull out the stock pylon and put one in that is
around 2 feet tall. Then we go beat the crap out of it on the ocean pulling
skiers north of 60mph for 62 miles.
Sounds like your pylon just needs bolt tightening, tough as it may be.
(I own a 35 where access to the pylon is surprisingly easy).
Pesky Varmint
28 to 35 feet. And we pull out the stock pylon and put one in that is
around 2 feet tall. Then we go beat the crap out of it on the ocean pulling
skiers north of 60mph for 62 miles.
Sounds like your pylon just needs bolt tightening, tough as it may be.
(I own a 35 where access to the pylon is surprisingly easy).
Pesky Varmint
That's cool. No ski racing over here to my knowledge. I have followed the sport through Hot Boat and Powerboat mags. Looks interesting.
All the kids here are wakeboarding behind direct drive and v-drive inboard ski boat with towers and big stereos.
#8
Registered
Join Date: Jun 2006
Location: Paden City, WV
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
Aquaman,
I too must be in the monority. We tow either a three person tube or a four person tube or both. We also ski and slalom as well. So far, knock on wood, ours is still solid as well. The tubes give it a real workout though and I have often wondered about developing the same problem you are experiencing. You may have to go to a cable and pully type device connected to the transom tie downs?? Then utilize Steve's idea.
Maybe some one will come up with a lighted pylon too?
Not much help but plenty of moral support!
BTW, the Tube is a great place to listen to that exhaust too!
I too must be in the monority. We tow either a three person tube or a four person tube or both. We also ski and slalom as well. So far, knock on wood, ours is still solid as well. The tubes give it a real workout though and I have often wondered about developing the same problem you are experiencing. You may have to go to a cable and pully type device connected to the transom tie downs?? Then utilize Steve's idea.
Maybe some one will come up with a lighted pylon too?
Not much help but plenty of moral support!
BTW, the Tube is a great place to listen to that exhaust too!
#10
Charter Member
![](https://www.offshoreonly.com/forums/images/icons/charter_member_star.gif)
![Default](/forums/images/icons/icon1.gif)
I used to tow the kids on the tube behind our Flame!
Now we use the Seadoo jet boat for that. i still have the ski pylon on the Nordic, I hang my rope ladder on it for getting in and out of the water.
Dean
![EEK!](/forums/images/smilies/eek.gif)
Dean
__________________
Everything is for sale @ a certain $$
Everything is for sale @ a certain $$