Looking for a flame
#11
Off the Radar
Platinum Member
Join Date: May 2001
Location: Short Pump or Colonial Beach, VA
Posts: 1,097
Likes: 0
Received 1 Like
on
1 Post
Dave from Salt Lake needed to put the larger tabs to keep his straight at 100. That was his Salt Lake speed with 588's. I think he said it made 742HP. What engines do you have?
I did a mod to the 500EFI that made a dynoed 575HP. On a cool day the boat ran 95. Most others it was 92-93. That was spinning 30's 5800rpm
I did a mod to the 500EFI that made a dynoed 575HP. On a cool day the boat ran 95. Most others it was 92-93. That was spinning 30's 5800rpm
Last edited by Linster; 11-12-2012 at 03:17 PM.
#12
Never Enough
Platinum Member
Thread Starter
Join Date: Apr 2005
Location: .
Posts: 92
Likes: 0
Received 0 Likes
on
0 Posts
Dave from Salt Lake needed to put the larger tabs to keep his straight at 100. That was his Salt Lake speed with 588's. I think he said it made 742HP. What engines do you have?
I did a mod to the 500EFI that made a dynoed 575HP. On a cool day the boat ran 95. Most others it was 92-93. That was spinning 30's 5800rpm
I did a mod to the 500EFI that made a dynoed 575HP. On a cool day the boat ran 95. Most others it was 92-93. That was spinning 30's 5800rpm
I have stock 525's w/ xr drive. I like the way it runs, but it does need bigger tabs IMHO. Here are the pics of the new electric bolsters I had installed 2 weeks ago. Same one they put in the new 39 just not as tall.
Last edited by Mhale00; 11-12-2012 at 08:56 PM.
#13
Never Enough
Platinum Member
Thread Starter
Join Date: Apr 2005
Location: .
Posts: 92
Likes: 0
Received 0 Likes
on
0 Posts