Looking For Used Late Model 28' Heat
#13
Registered
You can not order Nordic boats from the factory. We are a Nordic dealer located at Jamestown Ky. on Lake Cumberland. Just a 5 hour drive north of Atlanta. Unlimited Performance Marine www.unlimitedperformancemarine.com
#16
Registered
No power, no problem. Most people order the minimum power to get the drive already installed. You generally come out ahead the stock engine can be easily sold for a good buck.
My e-mail is [email protected]
My e-mail is [email protected]
#17
Registered
Thread Starter
Join Date: Nov 2002
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Eternal Warrior,
My motor is a blueprinted 502 with all the good stuff that dyno'd at 802 hp and 742 ft-lb of torque. This motor ran in front of a Volvo DPX for years without torque related drive problems. I love the stuff, except for the lack of gear and prop options.
My motor is a blueprinted 502 with all the good stuff that dyno'd at 802 hp and 742 ft-lb of torque. This motor ran in front of a Volvo DPX for years without torque related drive problems. I love the stuff, except for the lack of gear and prop options.
#20
Registered
Hey VolvoRules,
Bobl IS a Nordic dealer. Check your logistics, he's in Texas and can order and rig the boat any way you want it. You could even pick it up in Havasu when done if that worked better for you. Power, no power, one of his custom engines, IMCO drive only, ITS drive only, whatever; ready for your motor.
Bob at Full Throttle Marine 1-830-693-5591
Later,
Dave
Bobl IS a Nordic dealer. Check your logistics, he's in Texas and can order and rig the boat any way you want it. You could even pick it up in Havasu when done if that worked better for you. Power, no power, one of his custom engines, IMCO drive only, ITS drive only, whatever; ready for your motor.
Bob at Full Throttle Marine 1-830-693-5591
Later,
Dave