BajaIceBreaker

That doesn't sound like a terrible price. IT sure sounds like a big job. Too pricy for my ole' Baja, but for that boat, it would be worth the dough.

Linster

Drilled the hole yesterday. I got out less than a 12 ounce can of water. Time to fit the plug now.

Linster

Not that hard to install the plug. I had to get a 2" sanding disc to flatten the upper side of the hull where the mount goes to keep the plug from rocking.

Dean Ferry

At least there wasn't alot of water there. This doesn't seem to be feasible for me. With my boat on the lift, I can't access this drain plug, if I was to install it.
It's only on the trailer 2-3 times!
Dean

Dean Ferry

What about the second step? Is a drain plug required there too?
Dean

Linster

Not that I know of, from my understanding it id the bulkhead that stops the water not the step. Maybe Gary could get the answer.

39 Unlimited

Dean, If you take on a lot of water from a rain storm or whatever you will retain water from your front bulkhead to the bow. The front will not drain to the bilge on your 35. After the front bulkhead everything drains to the bilge no need for a drain in the back step.

I will try to locate pictures of your boat before the floor is installed to illustrate.

Gary

Dean Ferry

Gary,
Thanks alot. I found water beside the right side of my belly tank, sitting on top of the foam the belly tank is secured in. It's right under my bolster, looking thru the inspection portal. I'm hoping it's just water collecting from all the rain we have been getting?!
Dean