Looking for a fuel tank fabricator in New England
#1
Registered
Thread Starter
Join Date: Aug 2007
Location: Sandown, NH - Sebago Lake Region, ME
Posts: 2,960
Likes: 0
Received 7 Likes
on
7 Posts
Looking for a fuel tank fabricator in New England
My tank has a hole in it!
With todays gas prices I can't afford any of it spilling into the bilge.
Anyone have any recomendations on where I can buy or have made a new tank. The tank holds 150 Gallons and is roughly 2' wide X 14" deep X 8' long. I would prefer to find someone in New England to avoid shipping costs but I will take any suggestions.
Thanks
502ss
With todays gas prices I can't afford any of it spilling into the bilge.
Anyone have any recomendations on where I can buy or have made a new tank. The tank holds 150 Gallons and is roughly 2' wide X 14" deep X 8' long. I would prefer to find someone in New England to avoid shipping costs but I will take any suggestions.
Thanks
502ss
#2
Registered
Join Date: Feb 2005
Location: oceanport nj
Posts: 1,626
Likes: 0
Received 0 Likes
on
0 Posts
http://www.sptanks.com/webdev/home.htm
Only place I know. Used to have them make tanks for me. Out of that business now.
Only place I know. Used to have them make tanks for me. Out of that business now.
#3
Registered
Join Date: Oct 2001
Location: greenwood lake USA
Posts: 582
Likes: 0
Received 0 Likes
on
0 Posts
I replaced a tank in my old donzi a few years back got it from
florida marine tanks I think it was fabricated in ohio and once I signed off on the final drawing i had the tank in a week or so I know some other donzi guys that had them make a custom tank for them
they also made tanks for alot of MFG's so they might have the plans for your tank
www.floridamarinetanks.com
florida marine tanks I think it was fabricated in ohio and once I signed off on the final drawing i had the tank in a week or so I know some other donzi guys that had them make a custom tank for them
they also made tanks for alot of MFG's so they might have the plans for your tank
www.floridamarinetanks.com