tomcei

If someone could measure their dash for me it would really help me out. I forgot to get this info before I sent my boat off.
I need the two (2) black lines measured. From where the tab/trim switches start to form or rise up on the right over to the left edge/corner. Then of course from the lower left corner up to the upper left top of the dash.
I'm making a mock up dash so I can play around with gauge sizes.
Thanks,
Tom

Craney

Tom, from the tab/trim switches to the corner is 17'' and corner up is 8'' But my dash looks a little bigger then yours.

tomcei

That seems about right. My 28 is a 95 what year is yours. I would imagine that Jo would have keep the helm mold the same .

Here are some other shots from different angles

Griff

My 28 is a '96 and the dash measure 21.5" across and 8" up on the lines you have indicated. Mine looks to be the same as yours.

Here's a pic of mine.

tomcei

Thanks guys

It's gona be close to get any gauges to fit around the Monster series and look right. I'm going to have to wait on my boat and tape cut outs on the dash and shuffle them around until it looks good I guess.