Rub Rail on a 24
#12
Registered
![](https://www.offshoreonly.com/forums/images/icons/prop.gif)
Thread Starter
Join Date: Jan 2006
Location: Newport, RI
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
Thanks Let me know if you see something that is screwed up or can be inproved alot of this is geuss work and things I have seeing on the internet.
#13
Gold Member
![](https://www.offshoreonly.com/forums/images/icons/gold_member_star.gif)
Join Date: Jul 2004
Location: Croton, MI
Posts: 257
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
Todd, your story is just like mine. Mine is an 80' also. When I bought it it was in pretty rough shape, but things are coming around now. The previous owner "rigged" everything including duct tape to keep the water from coming in the starboard exhaust pipe! All it needed was a new o-ring seal.
Good luck with your project!
Shawn
Good luck with your project!
Shawn
#15
Registered
![Default](/forums/images/icons/icon1.gif)
tg,
I saw your post on cleat placement, and realizing yousr is the same year as mine, I did a quick search.
Your boat looks great, glad you're getting back on the project.
Mine is moving along slowly, but it'll be ready when it's ready.
Did you finish the rub-rail yet??
I saw your post on cleat placement, and realizing yousr is the same year as mine, I did a quick search.
Your boat looks great, glad you're getting back on the project.
Mine is moving along slowly, but it'll be ready when it's ready.
Did you finish the rub-rail yet??
#17
Registered
![Default](/forums/images/icons/icon1.gif)
I have several portions of the project 95-98% done, but they aren't "done".
Can I ask you...
What did you do to extend the dash panel for the throttles??
I'm installing the same package of throttle/shifter, and it's a 1/4" longer than the spot on the dash.
Your's looks good - what did you have to do??
Looks like you built it out with a pad.
Thread
Thread Starter
Forum
Replies
Last Post
dj_merk_e
Scarab
14
02-19-2008 11:19 PM