My 28 Turnkey?
#1
Banned
Gold Member
Thread Starter
Join Date: Aug 2002
Location: IL
Posts: 5,660
Likes: 0
Received 0 Likes
on
0 Posts
My 28 Turnkey?
Toying with the idea of starting with a new hull for my 800+HP engine and Konrad Drive.
My engine is going in for a complete freshening and inspection next week.
Would there be any interest in my 2003 28, full pleasure set up, 648 HP Engine and XR Drive?
The hull has 83 Hours on it and the drive has 20+ I believe.
What is a reasonable price for this set up/year?
My engine is going in for a complete freshening and inspection next week.
Would there be any interest in my 2003 28, full pleasure set up, 648 HP Engine and XR Drive?
The hull has 83 Hours on it and the drive has 20+ I believe.
What is a reasonable price for this set up/year?
#2
JC Performance Engines
Gold Member
Re: My 28 Turnkey?
75-80K?
The fact that you've had engine problems makes me leary of that motor or the builder of it. If i bought the boat w/ that motor, i'd probably have JC take it apart to check clearances and all....
The fact that you've had engine problems makes me leary of that motor or the builder of it. If i bought the boat w/ that motor, i'd probably have JC take it apart to check clearances and all....
#3
Banned
Gold Member
Thread Starter
Join Date: Aug 2002
Location: IL
Posts: 5,660
Likes: 0
Received 0 Likes
on
0 Posts
Re: My 28 Turnkey?
That's why it's being rebuilt and everything checked. I pulled it the other day and didn't drop the pan yet. Could be bearings or an oil pump. All I know is my pressure was not where it usually is and I shut it down.
If I did sell it turnkey, it would be as right as it could be. I don't sell problems to people.
If I did sell it turnkey, it would be as right as it could be. I don't sell problems to people.