Go Back  Offshoreonly.com > Owners Forum > Pantera
Prop Choices >

Prop Choices

Notices

Prop Choices

Thread Tools
 
Old 05-11-2007, 05:33 AM
  #1  
Driver-441
Racer
Thread Starter
 
TeamSaris's Avatar
 
Join Date: Aug 2004
Location: Lake George
Posts: 11,859
Received 1,097 Likes on 293 Posts
Default Prop Choices

Ok, I know its not a Pantera but its pretty similar. We have a 27 Avanti with a custom built 525 in it (496 Cube, Accel DFI etc). It has a pretty good hook,strakes that suck the hull to the water and has no bowlift. Before we make our changes to the hull, we figured we would play with props for a little bit. We are running a 28 B1 now an are getting about 5000 out of it a 65 mph. We need to turn about 54-5500. We tried a 25 maximus but it wasnt much better.What prop do you guys run on your 28s?
Thanks, Johnny
TeamSaris is offline  
Old 05-11-2007, 07:22 AM
  #2  
Goumada P5-38
Gold Member
 
Jmemoli's Avatar
 
Join Date: Jul 2001
Posts: 638
Received 10 Likes on 6 Posts
Default

Try a 26B1 - If that doesnt work too well, try getting a spacer and dropping the drive . Your prop slip is about 25% , and should be around 12-14 .
With the X dimension too high , you wont be able to carry the bow .

do you know the X . Do you know how far the prop shaft is below the keel ? Measure it and let us know .

Jerry
Jmemoli is offline  
Old 05-11-2007, 09:02 AM
  #3  
JC Performance Engines
Gold Member
 
Stormrider's Avatar
 
Join Date: Jul 2002
Location: Long Island, NY
Posts: 8,891
Received 23 Likes on 18 Posts
Default

Try a 26B1 and a 27 Mir+.
see how the rpms and the boat reacts.

and if jerry's slip calc is correct, that is quite high.
Stormrider is offline  
Old 05-11-2007, 11:43 AM
  #4  
Registered
 
Dude! Sweet!'s Avatar
 
Join Date: Nov 2006
Location: Huntington Beach, CA
Posts: 1,955
Likes: 0
Received 0 Likes on 0 Posts
Default

Sounds like my boat. Griff put in a 3" spacer and it runs a touched up 26P B1. Runs good and pulls up to about 5300.
Dude! Sweet! is offline  
Old 05-11-2007, 07:40 PM
  #5  
Driver-441
Racer
Thread Starter
 
TeamSaris's Avatar
 
Join Date: Aug 2004
Location: Lake George
Posts: 11,859
Received 1,097 Likes on 293 Posts
Default

It has a 1" spacer and is in the water quite a bit. We just want to get a couple more MPH out of her before we make some serious changes.
TeamSaris is offline  
Old 05-12-2007, 04:16 AM
  #6  
Charter Member # 55
Charter Member
 
Griff's Avatar
 
Join Date: Oct 2000
Location: Omaha/LOTO
Posts: 19,657
Received 1,890 Likes on 950 Posts
Default

Originally Posted by Dude! Sweet!
Sounds like my boat. Griff put in a 3" spacer and it runs a touched up 26P B1. Runs good and pulls up to about 5300.

Also, it has a notched transom, and came from the the factory with a 2" spacer. I switched to the 3" spacer and the propshaft is 4.25-4.5 inches below the bottom.
Griff is offline  
Old 05-12-2007, 05:57 PM
  #7  
Registered
 
scarabman's Avatar
 
Join Date: Nov 2002
Location: TR, NJ
Posts: 2,009
Received 196 Likes on 103 Posts
Default

I am familiar with the 27 Avanti. You need to take the hook out, period.
scarabman is offline  
Old 09-20-2007, 08:05 PM
  #8  
Driver-441
Racer
Thread Starter
 
TeamSaris's Avatar
 
Join Date: Aug 2004
Location: Lake George
Posts: 11,859
Received 1,097 Likes on 293 Posts
Default

Originally Posted by scarabman
I am familiar with the 27 Avanti. You need to take the hook out, period.
Hooks out. Still only spinning the 26 4650 at 67MPH.
We have a bigger motor going in soon though.
TeamSaris is offline  
Old 09-21-2007, 08:30 AM
  #9  
Charter Member
Charter Member
 
IRONMAN's Avatar
 
Join Date: Jan 2001
Location: south east of dome island
Posts: 1,235
Received 2 Likes on 2 Posts
Default

Originally Posted by fast fun 2
Hooks out. Still only spinning the 26 4650 at 67MPH.
We have a bigger motor going in soon though.
It makes no sense that you could spin the 28 at 5000 and now only spin the 26 at 4650. Have you tried any Mirage Props? They typically work well on the 7' beam boats if your drive height will allow it.
IRONMAN is offline  
Old 09-21-2007, 09:10 AM
  #10  
Gold Member
Gold Member
 
ziemer's Avatar
 
Join Date: Apr 2006
Location: St. Cloud, FL
Posts: 1,479
Received 4 Likes on 3 Posts
Default

Originally Posted by IRONMAN
It makes no sense that you could spin the 28 at 5000 and now only spin the 26 at 4650. Have you tried any Mirage Props? They typically work well on the 7' beam boats if your drive height will allow it.
Sounds like the hook in the bottom had a lot to do with it. The hook will push the bow down and potentially lift the rear which can cause the prop to slip more.

Does the bow seem to carry better now? You're now at about a 12% slip which is pretty good especially with a bravo. I would try a Mirage too, just to see if there's a difference. Maybe try to find a regular ol' 25 Mirage and see what it does.
ziemer is offline  


Quick Reply: Prop Choices


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.