24' - Throttle Shifter cable length?
#3
Registered
Thread Starter
Awesome!!!
Thanks JO!!
Can you still get me those line drawings of the profile?? If you sent them, I never got them.
I'm ready to start laying out plans for paint in the spring
I'm sure when I'm done you'll still be proud she's wearing the Pantera name.
I'll call you tomorrow as a reminder, and I still need to order some sweatshirts anyway.
Thanks JO!!
Can you still get me those line drawings of the profile?? If you sent them, I never got them.
I'm ready to start laying out plans for paint in the spring
I'm sure when I'm done you'll still be proud she's wearing the Pantera name.
I'll call you tomorrow as a reminder, and I still need to order some sweatshirts anyway.
#5
Registered
Thread Starter
That might be helpful if decide to attach a spare in the form of a weedwacker.
Good luck in the motor search tomorrow - go ahead and buy the big one, and work out the money later - Make Steve buy your lunch after he helps you clamp it on! That'll save you a couple bucks!
Good luck in the motor search tomorrow - go ahead and buy the big one, and work out the money later - Make Steve buy your lunch after he helps you clamp it on! That'll save you a couple bucks!
#6
That might be helpful if decide to attach a spare in the form of a weedwacker.
Good luck in the motor search tomorrow - go ahead and buy the big one, and work out the money later - Make Steve buy your lunch after he helps you clamp it on! That'll save you a couple bucks!
Good luck in the motor search tomorrow - go ahead and buy the big one, and work out the money later - Make Steve buy your lunch after he helps you clamp it on! That'll save you a couple bucks!
Pick up my 225 3 liter on saturday
#7
Registered
Bouyhunter,
I sent you the line drawings of the 24' model twice last month. I will call you right after the holiday's and email them to you again while we are on the phone to make sure you have them attached with the email I send you.
I am sorry not to have gotten you the length to the cable you need but I was very busy all day and did not get to it. I will send it to you soon or post it here.
JO
I sent you the line drawings of the 24' model twice last month. I will call you right after the holiday's and email them to you again while we are on the phone to make sure you have them attached with the email I send you.
I am sorry not to have gotten you the length to the cable you need but I was very busy all day and did not get to it. I will send it to you soon or post it here.
JO
#8
Registered
Thread Starter
Thanks JO.
I've been out of town a few days myself. I'm not in a huge rush at this point, but I want to start accumulating my parts so I'm ready to start wrenching when the weather breaks.
Look forward to talking to you next week.
Tim
I've been out of town a few days myself. I'm not in a huge rush at this point, but I want to start accumulating my parts so I'm ready to start wrenching when the weather breaks.
Look forward to talking to you next week.
Tim
#9
Charter Member
Charter Member
I had replaced one of them in '96 or '97 but I cannot remember the length needed. On my 28 I needed to get longer cables when I changed the type of controls so you may need longer ones anyway. The lengths should be stamped in the red jacket of the cable about 1 foot from the end if I remember correctly. Good Luck Chris
#10
Registered
Thread Starter
Chris - Thanks, I'll have to look at that.
I'm changing to Gaffrig's, but keeping the same placement - so I'm thinking the cable length shouldn't change.
My real question is...
I'm also installing mechanical trim indicators - and I need cables for those also (tabs and drive).
I plan on mounting it up where the trim actuators (switches) currently are, and relocating the switches somewhere else.
Length's of those cables and the hook up's need more research.
I'm changing to Gaffrig's, but keeping the same placement - so I'm thinking the cable length shouldn't change.
My real question is...
I'm also installing mechanical trim indicators - and I need cables for those also (tabs and drive).
I plan on mounting it up where the trim actuators (switches) currently are, and relocating the switches somewhere else.
Length's of those cables and the hook up's need more research.