24SE engine compartment volume
#11
Registered
I'm just thinking about my engine compartment (seeing as that's where I've been spending a lot of time lately - motors out and I'm cleaning it up and re-rigging).
Gotta figure:
Beam - 6'6" to 7'
Length - 4' to 4'6"
Depth at keel - max 4'
I'm thinking max 126 CF - and that isn't taking into consideration for the 24 degree deadrise.
I think your 100 CF is probably about dead-on.
Mind you, this is just a quick calculation off memory and approximation, but I think you'd be pretty good with the 100.
Gotta figure:
Beam - 6'6" to 7'
Length - 4' to 4'6"
Depth at keel - max 4'
I'm thinking max 126 CF - and that isn't taking into consideration for the 24 degree deadrise.
I think your 100 CF is probably about dead-on.
Mind you, this is just a quick calculation off memory and approximation, but I think you'd be pretty good with the 100.
LOL...glad I wasn't the only one "thinking" about the dimensions. I used 6' wide, 4.5' long and 3.5' deep for 94.5 cubic feet.
#12
Registered
#14
Gold Member
Gold Member
Was thinking about one for mine also especially after Memorial Day weekend. We were out on that Saturday and passed a smaller bowrider style boat that was stopped and had smoke coming out of the engine compartment. Pretty sure it wasn't a fire but just an overheated engine, however it makes you think about it.
Hey Nicolasticity can you post some pics of your 24? It looks very similar to mine.
Hey Nicolasticity can you post some pics of your 24? It looks very similar to mine.
Thread
Thread Starter
Forum
Replies
Last Post
mcraymond3
General Boating Discussion
125
04-04-2014 11:55 PM