24SE engine compartment volume
#11
Registered
![Default](/forums/images/icons/icon1.gif)
I'm just thinking about my engine compartment (seeing as that's where I've been spending a lot of time lately - motors out and I'm cleaning it up and re-rigging).
Gotta figure:
Beam - 6'6" to 7'
Length - 4' to 4'6"
Depth at keel - max 4'
I'm thinking max 126 CF - and that isn't taking into consideration for the 24 degree deadrise.
I think your 100 CF is probably about dead-on.
Mind you, this is just a quick calculation off memory and approximation, but I think you'd be pretty good with the 100.
Gotta figure:
Beam - 6'6" to 7'
Length - 4' to 4'6"
Depth at keel - max 4'
I'm thinking max 126 CF - and that isn't taking into consideration for the 24 degree deadrise.
I think your 100 CF is probably about dead-on.
Mind you, this is just a quick calculation off memory and approximation, but I think you'd be pretty good with the 100.
LOL...glad I wasn't the only one "thinking" about the dimensions. I used 6' wide, 4.5' long and 3.5' deep for 94.5 cubic feet.
#12
Registered
#14
Gold Member
![](https://www.offshoreonly.com/forums/images/icons/gold_member_star.gif)
![Default](/forums/images/icons/icon1.gif)
Was thinking about one for mine also especially after Memorial Day weekend. We were out on that Saturday and passed a smaller bowrider style boat that was stopped and had smoke coming out of the engine compartment. Pretty sure it wasn't a fire but just an overheated engine, however it makes you think about it.
Hey Nicolasticity can you post some pics of your 24? It looks very similar to mine.![Wink](/forums/images/smilies/wink.gif)
Hey Nicolasticity can you post some pics of your 24? It looks very similar to mine.
![Wink](/forums/images/smilies/wink.gif)
![](http://i112.photobucket.com/albums/n177/ziemer1/Pantera-3.jpg)
Thread
Thread Starter
Forum
Replies
Last Post
mcraymond3
General Boating Discussion
125
04-04-2014 11:55 PM