Trim Tab Question
#1
Registered
Thread Starter
Trim Tab Question
For you guys with 24 Panteras, what length tab do you have?
I have 12" Keikkefiers (sp?) electric piston style (looks old school). The piston comes out of the transom to push the tab down. I feel 12" isn't enough and was wondering if a longer one is available for that style I have? It would be nice to just remove one bolt, take off the existing tab and replace with a longer one. Adding a newer longer hydualic K Plane would be a lot of work.
Thoughts?
I have 12" Keikkefiers (sp?) electric piston style (looks old school). The piston comes out of the transom to push the tab down. I feel 12" isn't enough and was wondering if a longer one is available for that style I have? It would be nice to just remove one bolt, take off the existing tab and replace with a longer one. Adding a newer longer hydualic K Plane would be a lot of work.
Thoughts?
#2
JC Performance Engines
Gold Member
I had the 150s on my 24. Worked great.
Many like the 280s.
But both are hydraulic.
http://www.mercuryracing.com/accesso...netrimtabs.php
Many like the 280s.
But both are hydraulic.
http://www.mercuryracing.com/accesso...netrimtabs.php
#4
Registered
#6
Registered
Thread Starter
The problem is finding 18" bottom plates for the electric setup. If anybody knows where I can get them please let me know.
Elite Marine? Can you find them?
Elite Marine? Can you find them?
#9
Banned
Gold Member
Join Date: Aug 2002
Location: IL
Posts: 5,660
Likes: 0
Received 0 Likes
on
0 Posts
I will research it. You should be able to have a plate cut and reinforced to bolt to yours if we can find anything though.
I had 280's on my 24 that Scott has now.
I just bought 28" long tabs for my 28.
I had 280's on my 24 that Scott has now.
I just bought 28" long tabs for my 28.