Removing Center Panels - Bolster Seats
#1
Banned
Gold Member
Thread Starter
Join Date: Aug 2002
Location: IL
Posts: 5,660
Likes: 0
Received 0 Likes
on
0 Posts
Removing Center Panels - Bolster Seats
Is there anyway to remove the center panels form the Pantera bolster seats without removing the complete seat and sending it in for recovering? It looks as if they were installed last. After the seat was built. This is a 1999 24' Sport.
Thank You
Thank You
#2
Registered
Hi Kirk,
It has been a while since I have seen your boat.I can not remember now if your center section of your headrest can be removed without taking the vinyl apart.
Try to look up the bolster see if it has some bolts holding the center section down.You may need to re - wrap if not the entire bolster.
Our newer interiors are designed to have the center section removed.
Take a look and let me know, or maybe email me a closer pic. of your bolsters so I can refresh my memory.
The depth finder placement will be easier if I speak to you over the phone so I may explain to you how we install them.It is located in the strake.
I have a few Pantera stickers I will be sending to you this week.
Regards, JO
It has been a while since I have seen your boat.I can not remember now if your center section of your headrest can be removed without taking the vinyl apart.
Try to look up the bolster see if it has some bolts holding the center section down.You may need to re - wrap if not the entire bolster.
Our newer interiors are designed to have the center section removed.
Take a look and let me know, or maybe email me a closer pic. of your bolsters so I can refresh my memory.
The depth finder placement will be easier if I speak to you over the phone so I may explain to you how we install them.It is located in the strake.
I have a few Pantera stickers I will be sending to you this week.
Regards, JO