Pantera rigging=Top Notch.
#1
Performance Boat Center
VIP Member
Thread Starter
Pantera rigging=Top Notch.
I was a little late to work today...
I had a bad water temp gauge that was causing the left motor to cut out. So...
Got the new gauge...and had it installed in less than 30 min. And I had never done a gauge before...
I removed the bracket, and the nuts that secure the wires. Pulled the bad gauge through the dash... Lowered the new gauge in. and the electrical connectors slid right over the posts when I dropped the gauge through the dash! 10 minutes securing the tiny nuts on the posts and mount.. and I was done.
Everything under the dash is rigged tight, and organized so everything is easy to find.
What you won't find... is rigging like this on any other boat.
(I had a brand "D" before that was a wiring nightmare)
Jo and Pepe do a top notch job rigging their boats. Just so ya know...
I had a bad water temp gauge that was causing the left motor to cut out. So...
Got the new gauge...and had it installed in less than 30 min. And I had never done a gauge before...
I removed the bracket, and the nuts that secure the wires. Pulled the bad gauge through the dash... Lowered the new gauge in. and the electrical connectors slid right over the posts when I dropped the gauge through the dash! 10 minutes securing the tiny nuts on the posts and mount.. and I was done.
Everything under the dash is rigged tight, and organized so everything is easy to find.
What you won't find... is rigging like this on any other boat.
(I had a brand "D" before that was a wiring nightmare)
Jo and Pepe do a top notch job rigging their boats. Just so ya know...
__________________
Tim Gallagher
Performance Boat Center-FL
[email protected]
954-809-8739
Wright Performance, MTI, Cigarette, Sunsation
Tim Gallagher
Performance Boat Center-FL
[email protected]
954-809-8739
Wright Performance, MTI, Cigarette, Sunsation
Thread
Thread Starter
Forum
Replies
Last Post
little
Members On-line Video Section!!
8
12-19-2007 10:37 AM