B-Stubb

Jos comment about being in control for as fast as it runs its on rails right now . With the 5 blade its fool proof sort of

JROMY

Brian -

Scott was impressed as hell when he got back after the ride you gave him and Ron. He told me he couldn't believe how in control the boat felt. He said the motor sounded awesome also! Good luck with your drive issue - maybe you should bolt on a # 6 ..?

panteraman28

You might look at an imco sc, after I had mine re-shimed, have had no problems, also max machine has a good drive. Just a thought ,five blades have a lot less slip than a four blade, and with all that torque its very hard on the drive, you might want to go back to a four blade, I spin a 31pitch at 6200 rpm and my motor makes 800ft lbs of torque at 4000rpm. The cam torque is on the down side after 4000, so it would be easier on the drive

Full Throttle 525

Hey Guys:

Here are a few pics of Brian's boat in action. These were taken by my friend Scott when we were out last Thursday.

Full Throttle 525

Here's another of him leaving me in the dust!!!

Stormrider

nice shots ron... I think you need a blower!

VelocityMark

Hey I think I remember that.

Ron it was nice meeting you guys that day and you also have a beautiful boat. I only wish the water would have been a little rougher. I got some great pic's that day also.

VelocityMark

Thanks for my ride Brian I had a great time.

VelocityMark

A few more

VelocityMark

The best pic of the day