Cup Holders
05-15-2006, 10:13 AM
#1
Cup Holders
Does anyone know the sizes of the cup holders on 33PP? I have 3 white holders that are yellowing and wanted to order new ones before this weekend. The cup holders in the rear are smaller than the front and I haven't had a chance to measure them last weekend. Look at this link, looks like there are 3 sizes.
http://www.trickmarine.net/prodlist.cfm
http://www.trickmarine.net/prodlist.cfm
05-15-2006, 03:36 PM
#5
Registered
Re: Cup Holders
I took mine out last week and ran them through the dishwasher to get the scum off the bottom They cleaned up nice. I know that mine were all the same size. Pain in the a$$ to get back in, there very tight with the material around them.
05-16-2006, 01:40 AM
#8
Platinum Member
Platinum Member
Join Date: Sep 2003
Location: Milford, CT
Posts: 1,101
Likes: 0
Received 0 Likes
on
0 Posts
Re: Cup Holders
Want new cupholders? Try www.danamarineproducts.com. They have all kinds and in two sizes...unfortunately for me, but Pantera installed the smaller plastic ones as well, so I'll have to make the holes bigger or look for smaller cup holders. I ordered Powder coated Red ones and they are too big... 3 3/8 are the smallest. My plastic ones are less than 3". Can get those cheap things at Boaters World or West Marine for $1.99.
These boat builders really know how to go all out for the customer. You would think that when you are paying in excess of $100k they could at least put in PC ones at no extra charge. Would have been a whopping $60 more. It will cost me more in time & labor to make the hole bigger. Oh well, welcome to the real world.
These boat builders really know how to go all out for the customer. You would think that when you are paying in excess of $100k they could at least put in PC ones at no extra charge. Would have been a whopping $60 more. It will cost me more in time & labor to make the hole bigger. Oh well, welcome to the real world.
05-16-2006, 05:56 AM
#9
Member #154
Platinum Member
Join Date: Oct 2000
Location: SW CT & Long Island Sound
Posts: 7,895
Received 873 Likes
on
322 Posts
Re: Cup Holders
Ron...check Eddie Marine, they had some smaller ones last time I checked, not sure if they'll fit yours though but it's worth a shot.
05-16-2006, 08:39 AM
#10
Platinum Member
Platinum Member
Join Date: Sep 2003
Location: Milford, CT
Posts: 1,101
Likes: 0
Received 0 Likes
on
0 Posts
Re: Cup Holders
Thanks Indy, will do.
JROMY and I are expecting to run this summer, heard maybe you will too!! What do you have in the works? Would be real cool. You and yours are always welcome on my boat anytime. I have my little honey going with me lots this summer. Doing day trips. Will keep you posted.
JROMY and I are expecting to run this summer, heard maybe you will too!! What do you have in the works? Would be real cool. You and yours are always welcome on my boat anytime. I have my little honey going with me lots this summer. Doing day trips. Will keep you posted.
