cowisl

Where does everyone keep their anchor?...any ideas? Anyone make an actual "holder?"

ActiveFun

I put a couple of rubber tiles in the long storage under the v berth cushions and layed it in there.

XPRESS 33PP

There are metal hold downs screwed to the floor under my back seat that lock the anchor down.

dkwestern

I made velcro loops on the bulkhead under the V-Berth and tie it in there while its laying on the floor. No problems.

Scott Ferguson

west marine sells holders for anchors,all shapes and sizes.

cowisl

What do you guys think of me mounting it here? Right under the back seat

ActiveFun

I would stay clear of that wiring.

ActiveFun

XPRESS, where exactly are they? I have 3 separate access panels under each separate rear cushion.

XPRESS 33PP

I have the full rear bench seat that has 2 cushions and 2 large storage compartments, I know yours has the 3 smaller openings. I would keep it in the cabin and not the engine compartment . If it ever broke loose it could cause some damage. There were fender holders mounted on the bottom of my engine hatch and I removed them. I was worried about the ropes getting tangled in the belts. Try what dk said and Velcro it to the floor of the boat under the front bed storage. Sense it is the bottom of the boat I know there is no place to screw it down up there. Maybe put it on a piece of heavy rubber or foam.

Indy

Do yourself a favor, next time you throw in your anchor make sure your line is NOT attached Get rid of your Fortress or Danforth and buy a Box Anchor...best investment you'll EVER make for your boat. Throw in under your bench seat in it's own bag.

http://www.slideanchor.com/box.asp