Powerplay Boats
07-09-2010, 02:27 PM
#1381
Registered
Join Date: Oct 2009
Location: st joseph martinique f.w.i
Posts: 358
Likes: 0
Received 0 Likes
on
0 Posts
07-10-2010, 08:20 AM
#1385
Registered
The Powerplay was Danny's design and from a clean sheet of paper, the hull was tested and changes were made then it was tooled.
My personal vented system is a little different than Modifying an existing boat.
The Pantera Group has good running 41 Stepped Vee
One of our local Builders Pat at AT builds a 37 with his as AVH bottom or as a straight Vee. Look at the photos of it running very nicely done a single step DDC Schoell Bottom.
Fabio Buzzi's Boats run very well with his Bottom in mountainous seas.
The Speed record is held by a step Vee and Boats from Fountain run very well.
My personal vented system is a little different than Modifying an existing boat.
The Pantera Group has good running 41 Stepped Vee
One of our local Builders Pat at AT builds a 37 with his as AVH bottom or as a straight Vee. Look at the photos of it running very nicely done a single step DDC Schoell Bottom.
Fabio Buzzi's Boats run very well with his Bottom in mountainous seas.
The Speed record is held by a step Vee and Boats from Fountain run very well.
07-10-2010, 09:01 AM
#1386
Platinum Member
Platinum MemberThread Starter
Join Date: Apr 2001
Location: Beautiful Fort Lauderdale www.cheetahcat.com
Posts: 10,833
Likes: 0
Received 6 Likes
on
6 Posts
There was a simple way to get the bottom running on a "Air" Film without any radical geometry changes which was the approach I chose which made a lot of things easy from handling to trailer bunk considerations.
Someone probably had the same Idea long before I did.
07-10-2010, 06:46 PM
#1387
Banned
Join Date: Dec 2006
Location: Atlanta
Posts: 368
Likes: 0
Received 0 Likes
on
0 Posts
Someone probably had the same Idea long before I did.
