rebuilding my 33
#42
Gold Member
![](https://www.offshoreonly.com/forums/images/icons/gold_member_star.gif)
Thread Starter
![Default](/forums/images/icons/icon1.gif)
waiting on the short blocks to be assembled ... but it has been hot as hades down here , so I have been extending my shop so hopefully I can work on it in a month or so in comfort and a/c... need some 850 holleys for it... have a pair of 800's I want to sell, if anyone is interested and a nice set of sm manifolds.. that I don't need... bought 4 new maifolds and a set of 30 pitch lab merc props also for it....
#43
Member #154
![](https://www.offshoreonly.com/forums/images/icons/platinum_member_star.gif)
Join Date: Oct 2000
Location: SW CT & Long Island Sound
Posts: 7,895
Received 873 Likes
on
322 Posts
![Default](/forums/images/icons/icon1.gif)
waiting on the short blocks to be assembled ... but it has been hot as hades down here , so I have been extending my shop so hopefully I can work on it in a month or so in comfort and a/c... need some 850 holleys for it... have a pair of 800's I want to sell, if anyone is interested and a nice set of sm manifolds.. that I don't need... bought 4 new maifolds and a set of 30 pitch lab merc props also for it....
#46
Gold Member
![](https://www.offshoreonly.com/forums/images/icons/gold_member_star.gif)
Thread Starter
![Default](/forums/images/icons/icon1.gif)
I have been collecting parts for it and am ready to start on it again.... too many projects going on right now.. Got some quick flow 850 s for it and had to exchange the cams I got for it, but still been working on the small stuff in my spare time.. the gen 5 timing covers painted.. I also have a few sets of props for it when it does get running.....
#48
Gold Member
![](https://www.offshoreonly.com/forums/images/icons/gold_member_star.gif)
Thread Starter
![Default](/forums/images/icons/icon1.gif)
rebuilding the trim systems and getting ready to finish the engines...... got side tracked rebuilding my 22 velocity while the fiberglass guy had some free time...on the pp33 ,I.have to figure out a way to limit the drive rams travel because I'm adding a swim platform
Last edited by northernoffshore; 04-15-2017 at 11:14 PM.
#49
Registered
Join Date: Mar 2006
Location: Lake George NY
Posts: 432
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
rebuilding the trim systems and getting ready to finish the engines...... got side tracked rebuilding my 22 velocity while the fiberglass guy had some free time...on the pp33 ,I.have to figure out a way to limit the drive rams travel because I'm adding a swim platform
#50
Gold Member
![](https://www.offshoreonly.com/forums/images/icons/gold_member_star.gif)
Thread Starter
![Default](/forums/images/icons/icon1.gif)
Limiting the rams. Take the caps off and cut a pice of pipe to put on shaft to limit up travel, or Mercury sells limiters that have a slot in them. Merc ones are easy to install, don't have to disassemble anything I don't remember if I had 1" or 3/4" pipes in my 33 rams as I had swim platform on a low deck