PowerPlay in Ga heading south on hwy 400
#11
Registered
that's always been a very nice and fast PP
glad it made it back to LA
going to be a lot of PP back on the lake this yr
brian bought back the no agenda boat last yr
another just picked up the 1 from conneticut
dimitry,chris and another I don't know name have had them there
now pedal pusher came back,,,,,,
so think there will be 6 of them
hope to see it runnin at tickfaw,,,,
ill be in my lil boat or no agenda
no agenda boat has 572s and the headers raises ex to exit above the rubrail also
glad it made it back to LA
going to be a lot of PP back on the lake this yr
brian bought back the no agenda boat last yr
another just picked up the 1 from conneticut
dimitry,chris and another I don't know name have had them there
now pedal pusher came back,,,,,,
so think there will be 6 of them
hope to see it runnin at tickfaw,,,,
ill be in my lil boat or no agenda
no agenda boat has 572s and the headers raises ex to exit above the rubrail also
Last edited by johnmiffco; 03-24-2016 at 11:35 AM.
#13
Registered
well u picked up 1 hell of a nice PP
cannot wait to see it in person
did u come by and pick up some parts?
if so I remember,,,,,,,gotta post some int and motor pics
cannot wait to see it in person
did u come by and pick up some parts?
if so I remember,,,,,,,gotta post some int and motor pics
#14
Registered
Join Date: May 2006
Location: Covington, LA
Posts: 281
Likes: 0
Received 0 Likes
on
0 Posts
Yeah, I was in need of a water pump impeller and Brian thought he had one. I have the PP in storage for the moment as I finish up the transom assembly replacement on my Formula and then hopefully sell it. Once I get it home I'll get some good pics and post them.
Last edited by ezrizer; 03-25-2016 at 02:40 AM.
#17
Gold Member
Gold Member
#19
Member #154
Platinum Member
Join Date: Oct 2000
Location: SW CT & Long Island Sound
Posts: 7,907
Received 884 Likes
on
330 Posts
I do know for a fact that the X was raised in '97 to 18 1/2" from 17 1/4" for Bravos. But having no experience with 4's I can't say anything definitively about the X if it was made originally for those type of drives.
#20
Registered
Join Date: May 2006
Location: Covington, LA
Posts: 281
Likes: 0
Received 0 Likes
on
0 Posts
[ATTACH=CONFIG]553043[/ATTACH]
This is the only pic I have relative to prop shaft location. This is with 2" spacers. I don't think the standard Bravo setup had any bearing on how this boat was rigged. It's my understanding that the B class staggered race boat was the point of reference.
This is the only pic I have relative to prop shaft location. This is with 2" spacers. I don't think the standard Bravo setup had any bearing on how this boat was rigged. It's my understanding that the B class staggered race boat was the point of reference.
Last edited by ezrizer; 03-27-2016 at 11:10 AM.