Anchoring a 34' viper
#22
Re: Anchoring a 34' viper
P.A.
Running stock 575sci's with Maximus 32 pitch that have a bit of extra cup. Really too much prop as I only get to 4900/4950 RPM , would rather have a 30 pitch maximus.
Running stock 575sci's with Maximus 32 pitch that have a bit of extra cup. Really too much prop as I only get to 4900/4950 RPM , would rather have a 30 pitch maximus.
#23
Registered
Re: Anchoring a 34' viper
Originally Posted by performancemary
Guess top speed does have something to do with the driver. Have to tell you I was supprised when the guy that bought my boat said he hit 80. I tried and tried but could never get it over the 75 to 77 ramge.
Now I wonder if my current Avenger might see upper 80's with the right driver. My best so far is 84. Mabey I need to lose some weight.
Now I wonder if my current Avenger might see upper 80's with the right driver. My best so far is 84. Mabey I need to lose some weight.
Actually, as you know, there are a handfull of factors that all play into attaining that magic #. For sure the best time to go for it is early in the morning before you gas up for the weekend. That extra 1000 pounds sure has an impact.
#24
Re: Anchoring a 34' viper
Mac, actually I believe there is quite a bit up to the driver relative to top speed but the time of day , wind and current a;so plays a big part. However even with all that I was supprised the new owner hit 80. I was always frustrated that you guys all seemed to hit that range with the smaller motors but I just figured we had softer water, or sonething.
How is it going with your Viper. Any bites over the winter?
How is it going with your Viper. Any bites over the winter?
#25
Registered
Re: Anchoring a 34' viper
Jim, I took the Vyper off the market last spring for several reasons, not the least of which was the fact I love the boat. My biggest concern was how much TS Guns cost.
Also, I have been very unhappy at my job and was unsure of what I wanted to do for employment. But I start a new job first of the year so we'll see.
I sent you a PM.
Also, I have been very unhappy at my job and was unsure of what I wanted to do for employment. But I start a new job first of the year so we'll see.
I sent you a PM.
Last edited by Macklin; 12-21-2006 at 05:15 PM.