Has anyone every had any bottom work done on a 260?
#31
Registered
Thread Starter
Join Date: May 2007
Posts: 789
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
I guess you didn't see my earlier post. It will probably be Spring before I do I anything. That is unless someone buys the motor from my Pachanga or the Pachanga. I'm gonna bump my thread in the swap section after the 1st of the year. If I don't don't get any responses I'm gonna have my boat guy finish the Pachanga project! Hydraulic Steering,Tabs,Exhaust! I figure if I blow buy somma these guys in a pristine 87 Pachanga doin 90 give or take someone will want it!
After that I will do more research! I have been following the Hull Hydromatics? thread very closely! We will see!
![Big Grin](/forums/images/smilies/biggrin.gif)
#32
Registered
#33
Registered
Thread Starter
Join Date: May 2007
Posts: 789
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
I had a 454 Built from top to bottom for the procharger setup. It has a conservative 600HP. Probably more if I decide to let the RPM's loose. I hope I can keep the RPM's under 5500 and do what I want it to do. The setup is supposed to be good to 6000 or a bit more but I figure that will shorten the life a bit!