PQ General Discussion
#1841
Registered
![Default](/forums/images/icons/icon1.gif)
Have you guy's seen this one? Seems it is somewhere at my marina! Or the pictures are from there...
http://www.offshoreonly.com/classifi...o32471-en.html
http://www.offshoreonly.com/classifi...o32471-en.html
#1842
Registered
![Default](/forums/images/icons/icon1.gif)
I should be ready after this weekend. About all that's left is to change 2 sending units, wire the oil temp gauge and switch out all my switches/ wire indicator lights. A good wipe down and should be ready. As far as the wrap goes...im very happy with it. The seams look good and you can barely see the outline of the old graphics. I thought I had them sanded smooth but apparently not but you have to look at it at an angle down the side to really see them.
#1843
Registered
![](https://www.offshoreonly.com/forums/images/icons/platinum_member_star.gif)
![Default](/forums/images/icons/icon1.gif)
Speed has been reported to touch 85 mph on gps by the old owner. If it doesnt there will be two 3.0 litre whipples added to the 525's.
If I run 80 though I will be happy........for a while.
#1844
Registered
![](https://www.offshoreonly.com/forums/images/icons/platinum_member_star.gif)
![Default](/forums/images/icons/icon1.gif)
Have you guy's seen this one? Seems it is somewhere at my marina! Or the pictures are from there...
http://www.offshoreonly.com/classifi...o32471-en.html
http://www.offshoreonly.com/classifi...o32471-en.html
#1845
Registered User
Join Date: Apr 2008
Posts: 728
Likes: 0
Received 0 Likes
on
0 Posts
#1846
Registered User
Join Date: Apr 2008
Posts: 728
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
![EEK!](/forums/images/smilies/eek.gif)
![EEK!](/forums/images/smilies/eek.gif)
Last edited by sunsation96; 05-04-2011 at 01:34 PM.
#1847
Registered
![](https://www.offshoreonly.com/forums/images/icons/platinum_member_star.gif)
![Default](/forums/images/icons/icon1.gif)
I just want to burn gas....
#1849
Registered
![Default](/forums/images/icons/icon1.gif)
I should be ready after this weekend. About all that's left is to change 2 sending units, wire the oil temp gauge and switch out all my switches/ wire indicator lights. A good wipe down and should be ready. As far as the wrap goes...im very happy with it. The seams look good and you can barely see the outline of the old graphics. I thought I had them sanded smooth but apparently not but you have to look at it at an angle down the side to really see them.