PQ General Discussion
04-18-2013, 07:31 AM
#3271
Registered
There was no water in the oil at all.
When i was doing the oil change in the fall thats when i noticed the crack. I did take a chunk out of the skeg on my very first outing the first year and I had it repaired and put on stainless skeg protectors.
The welding shop told me that the lower was welded on before, probably from a previous incident.
Im not sure if i should weld it up or replace the housing.
When i was doing the oil change in the fall thats when i noticed the crack. I did take a chunk out of the skeg on my very first outing the first year and I had it repaired and put on stainless skeg protectors.
The welding shop told me that the lower was welded on before, probably from a previous incident.
Im not sure if i should weld it up or replace the housing.
Platinum Member
Gold Member
05-10-2013, 07:02 PM
#3274
Registered
looks sharp.......
05-10-2013, 07:35 PM
#3275
Registered
Finally getting ready...I think the ice is gone...got the new sunpad on
Attachment 500389
Attachment 500389
05-12-2013, 08:32 AM
#3277
Registered
Thread Starter
Well the new truck is all coming together, most in part bc of PROWRENCH, I was supposed to come help him install my lift but by the time i got there he already had it done and was alligning it!! 
Take a look if ya want!
http://www.offshoreonly.com/forums/t...ml#post3923725
Take a look if ya want!
http://www.offshoreonly.com/forums/t...ml#post3923725
