Rebuild update
#22
Charter Member
![](https://www.offshoreonly.com/forums/images/icons/charter_member_star.gif)
Join Date: Oct 2000
Location: Lake Orion, MI. USA
Posts: 1,560
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
Nothin better than a fresh set of motors! Lookin very good! Something about that merc blue that gets me going. I cant wait to see it in person!
__________________
Ray
Ray
#23
Registered
Join Date: Aug 2005
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
Looking for help !!!!! 1990 Powerquest Enticer 29..... On my 4 motor that has spun rod bearings..... any thought... Both motors were blue printed, and balanced... just bad luck or ?????
#24
Registered
![Default](/forums/images/icons/icon1.gif)
What motors are you running?
what RPMs are turning and what weight oil are you using?
has it been always the same rods that spun?
last time the motor was out did you do anything to the crank?
and did you line bore the block?
what RPMs are turning and what weight oil are you using?
has it been always the same rods that spun?
last time the motor was out did you do anything to the crank?
and did you line bore the block?
#25
Charter Member #30
![](https://www.offshoreonly.com/forums/images/icons/charter_member_star.gif)
Thread Starter
![Default](/forums/images/icons/icon1.gif)
You need to add a ton of info here. Just because it's a PQ it has nothing to do with the engine and may be better off posting in the tech section.
One thought that I immediately had. Did you hook up the oil lines backward?
One thought that I immediately had. Did you hook up the oil lines backward?
__________________
I have Steps & Bubbles!
I have Steps & Bubbles!