swellcraftman

Hello!
Recently purchased a 1990 Powerplay- Powerquest 290 project boat. I bought it at auction so I don’t know any of the history of the boat.
What I have figured out so far is the starboard drive won’t trim up or down, the port engine is seized, the cuddy needs some attention and I’m sure that’s not all! As soon as I get to ten posts I’ll get some pictures up.

Thanks
Brad

DrPepper2

That is a nice boat. I was looking at them before we bought a used Sea Ray 27 Pachanga, twin small blocks.

swellcraftman

Thanks Dr! Looking forward to getting it back on the water!

swellcraftman

To update the port drive does trim up and down with the trailer button but not with the switch. I did pop the limit switch off and everything appeared to look good with it, the wires looked good as well.

If the trailer switch works am I right to assume I need a new trim limiter switch?

swellcraftman

Need to get to ten to post pictures

swellcraftman

5th post

swellcraftman

6th post

swellcraftman

7th post

swellcraftman

8th post

jeff32

Only 4 left