280 cat set-ups
#1
VIP Member
VIP Member
Thread Starter
280 cat set-ups
I have a 2001 28 cat, running a 622CI N/A, dyno'ed at 830hp@5800 rpm and 890ftlb @ 3700rpm, 26P labbed B1, 1.34:1 gears, imco sc drive and standoff w/3" lift, boat runs mid 90's (94-96) at lake powell utah, elev, 3600 ft.
l'm looking to see what others are running and what there set up is, anyone interested, chime in.
Larry
l'm looking to see what others are running and what there set up is, anyone interested, chime in.
Larry
#2
Registered
I know of a 28. It was originally a 575sci boat with ITS. It is running 1000 HP on a 1.34 drive and IMCO lower, not sure of prop. Best I have heard was 114mph not turning optimal RPM. This is at low elevation.
#3
VIP Member
VIP Member
Thread Starter
Thats a good running cat, how did it handle those speeds, I'm thinking of adding a 14/71 but not sure of the boats capabilities. Thanks for the feed back. Larry
#4
Registered
280 cat settups
hey larry ,why dont you call randy schultz ,he is the one who built these boats ,I know he has had some big power in them with differerent drive configurations,give me a call if you want his number. 612 978 9897 dean
#5
VIP Member
VIP Member
Thread Starter
Thanks again
Larry
#6
Hey guys. Glad to see 280 cat guys posting here. Hopefully we all can share more info.
My boat is a 2001 280 with a 575sci and 1.5:1 XR drive. The current prop is a lab finished 30 pitch bravo repitched and restamped to a 32 which I can turn 5400rpm. I have not really had to do anything with setup. It seems to run the fastest with neatral trim. If you try to trim it up to air it out it feels good but it is not doing anything for you as far as speed...WOT you will see your speed go up and tach stay the same by trimming down. Watch your speedo not the tach. I dont think the X is very high since the is not much if any surface piercing going on.
On a side note...If any of you are running 575sci package...change your headgaskets and your blower oil. I dont care if it only has 100hrs on it. They are JUNK!!!
My boat is a 2001 280 with a 575sci and 1.5:1 XR drive. The current prop is a lab finished 30 pitch bravo repitched and restamped to a 32 which I can turn 5400rpm. I have not really had to do anything with setup. It seems to run the fastest with neatral trim. If you try to trim it up to air it out it feels good but it is not doing anything for you as far as speed...WOT you will see your speed go up and tach stay the same by trimming down. Watch your speedo not the tach. I dont think the X is very high since the is not much if any surface piercing going on.
On a side note...If any of you are running 575sci package...change your headgaskets and your blower oil. I dont care if it only has 100hrs on it. They are JUNK!!!
Last edited by JRider; 06-26-2008 at 09:27 AM. Reason: dislexia
#7
VIP Member
VIP Member
Thread Starter
Hey guys. Glad to see 280 cat guys posting here. Hopefully we all can share more info.
My boat is a 2001 280 with a 575sci and 1.5:1 XR drive. The current prop is a lab finished 30 pitch bravo repitched and restamped to a 32 which I can turn 5400rpm. I have not really had to do anything with setup. It seems to run the fastest with neatral trim. If you try to trim it up to air it out it feels good but it is not doing anything for you as far as speed...WOT you will see your speed go up and tach stay the same by trimming down. Watch your speedo not the tach. I dont think the X is very high since the is not much if any surface piercing going on.
On a side note...If any of you are running 575sci package...change your headgaskets and your blower oil. I dont care if it only has 100hrs on it. Theya JUNK!!!
My boat is a 2001 280 with a 575sci and 1.5:1 XR drive. The current prop is a lab finished 30 pitch bravo repitched and restamped to a 32 which I can turn 5400rpm. I have not really had to do anything with setup. It seems to run the fastest with neatral trim. If you try to trim it up to air it out it feels good but it is not doing anything for you as far as speed...WOT you will see your speed go up and tach stay the same by trimming down. Watch your speedo not the tach. I dont think the X is very high since the is not much if any surface piercing going on.
On a side note...If any of you are running 575sci package...change your headgaskets and your blower oil. I dont care if it only has 100hrs on it. Theya JUNK!!!
is your drive standard lower or shorty, what are you running?
97 - 98 mph, mine's raised 3" with a 12" standoff, and it seems to like the drive high, best speeds are with drive in neutral position or just a little up.
Larry
#9
Registered
280 cat set-ups
hey guys ,had a chance to finally run mine fathers day weekend, previously with the 575 stock xr drive 32 maximus cut down to 15 from 15 5/8 with two adults it would hit the rev limiter at 85 mph and would run 91-92 with 32 bravo 1. Now with the quadrotor engine, 5 adults the same maximus prop I backed off at 6000 rpm at 98 mph, have not tried the 32 b1 yet. also I added a 1 inch drive spacer and a nose cone this year. dean
#10
VIP Member
VIP Member
Thread Starter
hey guys ,had a chance to finally run mine fathers day weekend, previously with the 575 stock xr drive 32 maximus cut down to 15 from 15 5/8 with two adults it would hit the rev limiter at 85 mph and would run 91-92 with 32 bravo 1. Now with the quadrotor engine, 5 adults the same maximus prop I backed off at 6000 rpm at 98 mph, have not tried the 32 b1 yet. also I added a 1 inch drive spacer and a nose cone this year. dean