how to choose prop pitch&number of blades
#1
Gold Member
![](https://www.offshoreonly.com/forums/images/icons/gold_member_star.gif)
Thread Starter
Join Date: May 2001
Location: Niagara Falls , Canada
Posts: 144
Likes: 0
Received 0 Likes
on
0 Posts
how to choose prop pitch&number of blades
I have a 1984 30'scarab blown454's aproximate horsepower 600 trs drives .If i run a four blade prop what pitch should i use keeping the rpm's 5500 to 6000 looking for top end speed?
#2
Offshoreonly Advertiser
![](https://www.offshoreonly.com/forums/images/icons/charter_member_star.gif)
![Smile](/forums/images/icons/icon7.gif)
What is the wet weight of the boat?
This includes fuel, people, gear, food, beer, ice, etc., etc.
What is your gear ratio?
This includes fuel, people, gear, food, beer, ice, etc., etc.
What is your gear ratio?
__________________
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]
#4
Registered
![Default](/forums/images/icons/icon1.gif)
Start with a 24 or 26 Bravo 1 or 23 through 25 Hydromotive. The 23 or 24 should put you in the top end of your rpm range while the 25 or 26 should put you toward the bottom end of your rpm range.
Matt
Matt
#5
Offshoreonly Advertiser
![](https://www.offshoreonly.com/forums/images/icons/charter_member_star.gif)
![Smile](/forums/images/icons/icon7.gif)
26-28 Bravo 1 depending on how accurate your weight is.
I figured you to run the engines in the 56-5700 rpm range in the mid 80's
I figured you to run the engines in the 56-5700 rpm range in the mid 80's
__________________
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]
Thread
Thread Starter
Forum
Replies
Last Post
baronbob
Prop Talk
11
06-11-2007 07:58 PM
baronbob
Prop Talk
0
06-05-2007 09:40 PM
ratman
General Boating Discussion
8
01-20-2006 04:24 PM