Bravo 1 prop question
#3
Forum Regulator
VIP Member
Re: Bravo 1 prop question
Yep, the 'old-school' hub if it is for a regular small shaft Bravo Drive, has to be knocked out with the back end of a socket, and a hammer. Your Torque-Thrust hub insert for your XR/XZ drive slides right in.
#4
Offshoreonly Advertiser
Offshoreonly Advertiser
Re: Bravo 1 prop question
Yes and No..........
There was a vintage of Bravo 1 that did not allow for interchagable hubs. That was 9 years ago.
There was a vintage of Bravo 1 that did not allow for interchagable hubs. That was 9 years ago.
__________________
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]
Thread
Thread Starter
Forum
Replies
Last Post
1BIGJIM
Drives and Lower Units
3
06-10-2008 12:46 PM