Need prop for 1988 20 Ft Daytona Eliminator
#1
Registered
Thread Starter
![Default](/forums/images/icons/icon1.gif)
I need to know what prop I should try on this boat with this setup. Any info would be great.
1988 20 Ft Daytona Eliminator
3.4 litre merc
15" Setback
Nosecone, low water pickups
Jack Plate with 7 1/2" of travel.
I have no Idea where to even start. I bought the boat and motor seperate. Please help.
1988 20 Ft Daytona Eliminator
3.4 litre merc
15" Setback
Nosecone, low water pickups
Jack Plate with 7 1/2" of travel.
I have no Idea where to even start. I bought the boat and motor seperate. Please help.
#2
Offshoreonly Advertiser
![](https://www.offshoreonly.com/forums/images/icons/charter_member_star.gif)
![Smile](/forums/images/icons/icon7.gif)
COOOOL boat!
We like to run the 4bl OB cleavers on a rig like that. Start at 15x32 and we can work it from there. The 3.4 requires some added lift the 4bl will provide. We'll have to see how the boat handles at speed though to determine the best diameter. It may very well be less.
Do you have anything cleaverish to try??
Do you have extra gear case parts??
We like to run the 4bl OB cleavers on a rig like that. Start at 15x32 and we can work it from there. The 3.4 requires some added lift the 4bl will provide. We'll have to see how the boat handles at speed though to determine the best diameter. It may very well be less.
Do you have anything cleaverish to try??
Do you have extra gear case parts??
__________________
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]