SSM II and SSMIII props? ASD? too
#1
Charter Member
![](https://www.offshoreonly.com/forums/images/icons/charter_member_star.gif)
Thread Starter
![Default](/forums/images/icons/icon1.gif)
1. Will SSM3 props fit the SSM2?
2. Are the SSM4's the same also?
3. Has anyone tried an ASD6 rolla round ear on any of the above drives? It will fit the SSM2.
Thanks, Chris
2. Are the SSM4's the same also?
3. Has anyone tried an ASD6 rolla round ear on any of the above drives? It will fit the SSM2.
Thanks, Chris
#2
Offshoreonly Advertiser
![](https://www.offshoreonly.com/forums/images/icons/charter_member_star.gif)
![Smile](/forums/images/icons/icon7.gif)
The SSM II drive uses a 1 3/8" OD prop shaft and can only accept 4" hub lengths with 19 splines. Your key is the 4" hub. In "the day" SSM III drives came with 4" and then a longer 6" hub. The 4" can be adapted to the 6" prop shaft, but not the other way around.
__________________
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]