Need to borrow a set of Bravo 1 28's
#1
Registered
Thread Starter
Need to borrow a set of Bravo 1 28's
Im doing some prop testing and need to borrow a set of 28 bravo 1's. Ill pay shipping both ways, and if I do anything to em, Ill pay for em.
#2
Registered
Re: Need to borrow a set of Bravo 1 28's
Our Prop Fitting Program is avaiable to you, if you need it! Feel free to call me anytime.
Julie
Throttle Up Propellers
727-531-2255
Julie
Throttle Up Propellers
727-531-2255
#7
Re: Need to borrow a set of Bravo 1 28's
Matt can you run some calcs to help me figure out were I will be as far as props and speed.
6600 LB boat
24 Degree V w/ delta pad/ no steps
557s, 6000rpm, 660HP/722Ft.Lbs.
Arneson Surface Drives 1.36 ?? (I'm still waiting on these)
Here is where I was Before rebuilds
502s, 5400rpm, 500hp/565 Ft.lbs
Bravo 1s w/ 1.5
24 Hydros
76mph
Thankyou
Jud
6600 LB boat
24 Degree V w/ delta pad/ no steps
557s, 6000rpm, 660HP/722Ft.Lbs.
Arneson Surface Drives 1.36 ?? (I'm still waiting on these)
Here is where I was Before rebuilds
502s, 5400rpm, 500hp/565 Ft.lbs
Bravo 1s w/ 1.5
24 Hydros
76mph
Thankyou
Jud
#8
Offshoreonly Advertiser
Offshoreonly Advertiser
Re: Need to borrow a set of Bravo 1 28's
We also have a complete line of Bravo 1 propellers for testing should need them.
JShoup, you will slill be in the mid 20's for pitch in order to turn the higher rpm with the higher gear ratio.
JShoup, you will slill be in the mid 20's for pitch in order to turn the higher rpm with the higher gear ratio.
__________________
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]
Thread
Thread Starter
Forum
Replies
Last Post
rchevelle71
General Boating Discussion
3
06-22-2008 02:22 AM
DollaBill
General Boating Discussion
12
06-25-2007 11:52 AM