Labbing Hydro P5X's on 28 Daytona after adding 2" IMCO shorties?
02-24-2006, 05:41 PM
#11
Offshoreonly Advertiser
Offshoreonly Advertiser
Re: Labbing Hydro P5X's on 28 Daytona after adding 2" IMCO shorties?
Sorry Harper 220,
I feel I need to leave this alone. I have a different way of looking at that statement. You saw the other post so we are on the same page.
I feel I need to leave this alone. I have a different way of looking at that statement. You saw the other post so we are on the same page.
__________________
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]
Last edited by bbladesprops; 02-24-2006 at 06:37 PM. Reason: didn't think it was time for a thesis
02-24-2006, 05:46 PM
#12
Registered
Thread Starter
Re: Labbing Hydro P5X's on 28 Daytona after adding 2" IMCO shorties?
That made perfect sense to me Brett... 
To pick up speed without doing anything to the props would be a plus, going up a pitch or two would be an even bigger plus.
I just don't want to lose any mid-range, as this is where most of my boating is done.
To pick up speed without doing anything to the props would be a plus, going up a pitch or two would be an even bigger plus.
I just don't want to lose any mid-range, as this is where most of my boating is done.
Last edited by Harper220; 02-24-2006 at 05:51 PM.
Thread
Thread Starter
Forum
Replies
Last Post
SCRAPMAN1
General Boating Discussion
8
02-23-2006 10:12 PM
SCRAPMAN1
General Racing Discussion
3
02-23-2006 10:09 PM
