Bravo One compared to Chopper II
#1
Registered
Thread Starter
Bravo One compared to Chopper II
HI!
The Bravo One 4 blade prop is lower in pitch than stamped. How does a Chopper II 3 blade 28 compare in pitch to a Bravo One 4 blade prop? If the Bravo One is lower in pitch than the 28 stamped, how does it compare to a 3 blade. Normally a 4 blade compensate for pitch.
Cheeeers, Toffen G
The Bravo One 4 blade prop is lower in pitch than stamped. How does a Chopper II 3 blade 28 compare in pitch to a Bravo One 4 blade prop? If the Bravo One is lower in pitch than the 28 stamped, how does it compare to a 3 blade. Normally a 4 blade compensate for pitch.
Cheeeers, Toffen G
#3
Offshoreonly Advertiser
Offshoreonly Advertiser
Re: Bravo One compared to Chopper II
Do you mean how do they compare in pitch or how do they compare in general?
They are completely different in geometry and characteristics if that is that is what you are asking.
As far as pitch, the chopper is higher but yes the extra blade and hub can equalize the rpm outcome.
They are completely different in geometry and characteristics if that is that is what you are asking.
As far as pitch, the chopper is higher but yes the extra blade and hub can equalize the rpm outcome.
__________________
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]
#4
Registered
Thread Starter
Re: Bravo One compared to Chopper II
Hi!
Thanks. It was the pitch comparison I ws after.
But how will you compare the caracteristics between the Bravo One 4 blade and the Tempest 3 blade?
Cheeeers, Toffen G
Thanks. It was the pitch comparison I ws after.
But how will you compare the caracteristics between the Bravo One 4 blade and the Tempest 3 blade?
Cheeeers, Toffen G
Thread
Thread Starter
Forum
Replies
Last Post
tomas_wallin
Drives and Lower Units
2
10-17-2007 07:57 PM
tomas_wallin
General Q & A
7
01-12-2006 01:28 PM