Hydromotive Thrust Washer
#1
Registered
Thread Starter
![Default](/forums/images/icons/icon1.gif)
I just picked up a used Quad IV prop which should be here tomorrow. Do these use a standard Mercruiser thrust washer? Just want to be prepared as I am hoping to cut out of work early and do some testing!
![Smilie](/forums/images/smilies/smile.gif)
#2
Registered
![Default](/forums/images/icons/icon1.gif)
Yes, same as any Mercury but you will need the old style aft adapter if you don't have one already. It has a castellated top and about 1/8" of splines on the other side.
#3
Offshoreonly Advertiser
![](https://www.offshoreonly.com/forums/images/icons/charter_member_star.gif)
![Smile](/forums/images/icons/icon7.gif)
Part number
31211Q03
31211Q03
__________________
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]
#4
Registered
Join Date: Jul 2014
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
the ones i have have the hub built into the props. i didnt realize i needed such an adapter. now i am a little pissed because it is saturday afternoon and everybody is frickin closed.
Last edited by c_loud; 07-19-2014 at 06:51 PM.