Trottle-Up's Barracuda Propeller
#21
I'm trying to determine if the Throttle Up props should just replace my Hydromotives, or should I go with shorties and then use their props on my 35?
Julie - any word after you spoke with Matt last week? Thanks.
Julie - any word after you spoke with Matt last week? Thanks.
#22
Registered
Hey Rebel,
I would recommend that you investigate the nose cones and if you could get me the prop shaft measurement ( in relation to the hull)...I would feel more comfortable about the possibility of the shorty.
Julie
I would recommend that you investigate the nose cones and if you could get me the prop shaft measurement ( in relation to the hull)...I would feel more comfortable about the possibility of the shorty.
Julie
#23
Thanks for the reply, Julie. I'll get a measurement the next time I'm at the dock. We'll take a look to see if you think my slip will increase too much with the measurements that I take. At the very least a nose cone may help with aerodynamics.
#28
Registered
Sign Me Up For Over The Hub Also. 16.5x35 And Did I Mention Lefthand. Will Their Be Different Thicknesses For Different Hp ? How Many Blades Can You Put On An Over The Hub Prop ? Not Much Room On A Shaft Thats Only 3 Inches Wide !
#29
Registered
I am assuming that you are talking about #6 props. Thats the beauty with the CNC machine the thickness can be customized. As for blade count so far 5 blades on both the #6Props and the Outboard Cleavers we are working on.
Julie
Julie