Julie Throttle up
#1
Registered
Thread Starter
Join Date: Dec 2006
Location: Massena, NY
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
Julie
I just tested my 25p lab finished prop from you. I also just installed the new dana flow torque exhaust. Im running 67MPH GPS @ 4800 rpm . Do I have anything left. Its a 23 outlaw with a 496 mag and bravo 1 1.5 drive.
I just tested my 25p lab finished prop from you. I also just installed the new dana flow torque exhaust. Im running 67MPH GPS @ 4800 rpm . Do I have anything left. Its a 23 outlaw with a 496 mag and bravo 1 1.5 drive.
#7
Registered
![Default](/forums/images/icons/icon1.gif)
Very Nice! A 3MPH increase is very good for a Baja, or should I say any conventional Deep Vee hull. Your motor needs to run at 4800 zRPM at WOT so you have arrived. Congrats!
Julie
Julie
#8
Offshoreonly Advertiser
![](https://www.offshoreonly.com/forums/images/icons/charter_member_star.gif)
![Smile](/forums/images/icons/icon7.gif)
I don't want to throw a fly in the ointment but, you picked up 2.4 mph and 100 rpm with two adjustments. Exhaust and what ever prop work was done.
My point is, do one change or upgrade at a time. It is difficult to determine what worked and what didn't do much.
I'm surprised the exhaust didn't give you more rpm on its own.
You can actually run those motors right to the 4950 limiter without anything but performance gains.
My point is, do one change or upgrade at a time. It is difficult to determine what worked and what didn't do much.
I'm surprised the exhaust didn't give you more rpm on its own.
You can actually run those motors right to the 4950 limiter without anything but performance gains.
__________________
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]